• 877-412-3667 9AM - 3PM CST


Navigate to the Automatic Door and Hardware homepage

USA Company
​Located in Texas

Home > Resources > Automatic Door Opener Learning Resources > Replacing A Horton Automatic Door Opener

Replacing A Horton Automatic Door Opener

Replacing A Horton Automatic Door Opener

Horton Automatics manufactures the 7000 Series and 4000 Series automatic door openers. These automatic door operators can be found in commercial buildings all around the USA. But what if you want to replace these automatic door openers with a different model. Maybe your maintenance team has difficulty adjusting the door openers or making repairs. Whatever your reason may be, in this article we explain step by step how to replace Horton automatic door openers.

Identify Your Horton Automatic Door Arm Type

Horton automatic door openers typically surface mounted, meaning that the header enclosure mounts to the top of the door frame. An outswing push arm is typically used, however an inswing pull arm with track may be used. Identify what type of arm is used, outswing or inswing, as we will be replacing the Horton automatic door opener with the Commander automatic door opener with the same hand and arm type.

Identify If The Horton Activation Switches Are Wireless

Most Horton automatic door installations use wireless handicap buttons with a 9 volt battery and transmitter. Open the handicap button to check if they are wireless (have a transmitter) or hardwired (no transmitter). The handicap face plate can be removed by loosening the concealed allen screws, or by removing the screw located at the bottom of the mounting box.

Remove Power

Carefully remove the header cover on the Horton automatic door opener by removing all of the screws located at the bottom of the header. Be sure to hold on to the cover as you do this, so that it does not fall. Next identify the main power and disconnect it from the controller. If the handicap buttons were wireless, then there should be a receiver module. Disconnect the receiver module. If the handicap buttons were hardwired then remove the switch wires from the Horton C4190 controller.

Remove Horton Door Opener

Remove the Horton door arm from the gearbox and door. Then remove the controller, motor/gearbox, etc. Once all Horton components are removed, then remove the header enclosure.

Install New Automatic Door Opener

The next step is to install the Commander automatic door operator. Be sure to use the same arm type (outswing or inswing) and handing that the Horton automatic door opener was. The Commander automatic door opener is non-handed and can be used in any configuration, however the correct arm (outswing or inswing) must be noted at the time of purchase.

It's worth noting that the Commander automatic door opener is a heavy duty unit with all certifications so that it can be installed in any commercial building. It is UL Listed, fire rated, and manufactured in the USA. No matter your door type: hollow metal, commercial steel, commercial glass, or wood, the Commander automatic door opener is designed for easy installation. Be sure to reconnect the receiver module or handicap button switches to the Commander automatic door opener.

Benefits Of Replacement

Lower Cost Of Ownership

Have you ever had a door where you keep having to repair it? If you aren't repairing it yourself, then you are having to pay for a repair company each time which includes travel time, labor, and other miscellaneous charges. Many building owners who have their own on staff maintenance crews know that constant repairs can nickel and dime you. Sometimes the best solution is to go with a new type of automatic door opener.

Easy To Install

When we say easy, we mean easy. If your a building owner and you just don't understand how to fix your current automatic door opener system, then you need the the Commander automatic door opener. The controller is self tuning making installation and adjustment easy. Many door openers feature all types of adjustment potentiometers making any tune in or adjustment extremely sensitive and difficult. The Commander automatic door opener is reliable, durable, but designed for ease.

Made In USA

The Commander automatic door opener is manufactured in the USA. To us that means quality.

Disclaimer: The material in this article has no regard to the specific installation, building code requirements, law requirements, authority having jurisdiction, local or state requirements, or any particular needs of any viewer. This article is presented solely for informational and entertainment purposes and is not to be construed as a recommendation or solicitation. Nor should any of its content be taken as advice. Automatic Door and Hardware is not an installation advisor. The views expressed in this article are completely speculative opinions and do not guarantee any specific result. Commercial doors, hardware, and automatic door parts should only be worked on by trained, qualified, and licensed professionals; failure to do so can result in danger. Any opinions expressed in this article are subject to change without notice. Automatic Door and Hardware is not under any obligation to update or keep current the information contained herein. Automatic Door and Hardware may have an interest in the securities and commodities of any entities referred to in this material. Automatic Door and Hardware accepts no liability whatsoever for any loss or damage of any kind arising out of the use of all or any part of this material. Automatic Door and Hardware recommends that you consult with a licensed and qualified professional before making any modifications or repairs to commercial doors, automatic doors, or hardware components of those doors. The content covered in this article is NOT to be considered as advice. I’m NOT an adviser. These are only my own personal and speculative opinions, ideas, theories, hypotheses, charts, technical analysis, insights, and curated news publications. The technical analysis in this article is completely speculative and does NOT guarantee any specific result. The technical analysis in this article has NO proven rate of accuracy. Do NOT repair or modify your doors and/or hardware based upon the analysis presented in this article. Always do your own research and only use trained and licensed professionals for any repairs or modifications. I will NOT be held liable for any of your personal repairs or modifications or any losses/damages that you may incur if you do repair or modify your doors and/or hardware. Information provided through this article is provided to you as is without any express representations or warranties of any kind, and we make no representation or warranty that this article (or any information provided in response to your inquiry), will be accurate, complete, or error-free. You agree that you must evaluate all information and responses, and that you bear all risks associated with, the use of this article, including any reliance on the accuracy, completeness, or usefulness of any information or materials made available through this article. This article is purely for entertainment purposes only!

Get The Parts That Fit

Filter your results by entering your commercial door's Make and/or Model to ensure you find the parts that fit your door.

Need A Quotation?

Receive A Free Quotation Immediately

Email custsvc@autodoorandhardware.com or call 877-412-3667 with the product you are interested in, the quantity, and any other requirements you may have. One of our specialists will email you back a free quotation shortly. Did you know we offer free design help? If you are unsure of the product you need, but know the scope of what function or application you need, our design team can help! Contact us with your inquiry today.