• CALL 877-412-3667 9AM - 3PM CENTRAL

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

USA Company
Located in Texas

  • CALL 877-412-3667 9AM - 3PM CENTRAL

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

USA Company
Located in Texas

Home >
PD15-M-RIM Electrified Rim Exit Device With Motorized Latch Retraction (Jackson 1295 and Kawneer 1786 Replica)

*Generic Image, Refer to Description for Model and Finish

PD15-M-RIM Electrified Rim Exit Device With Motorized Latch Retraction (Jackson 1295 and Kawneer 1786 Replica)

Automatic Door and Hardware
$

Item Return Policy: Assembled Per Order, Non-Returnable
Part Number: DCPD15-M-RIM
Usually Ships in 3-5 Business Days

FREE SHIPPING ON ORDERS OVER $200

DC USA Approved PD15-M-RIM Electrified Rim Exit Device With Motorized Latch Retraction (Jackson 1295 and Kawneer 1786 Replica)


The PD15/16 is a complete retrofit storefront exit device series for the Kawneer 1686/1786 & Jackson 1285/1295.It's made for use in all institutions and commercial buildings storefront applications. Install this device with the confidence of knowing that the PD15/16 series meets or exceeds the high standards of other grade 1 products. In retrofit situations you can utilize the existing hardware (i.e vertical rods) with no additional prep required.

The DC USA Approved PD15-M series is a motorized latch pullback Grade 1 storefront exitdevice; made for use in all institutions and commercial buildings storefront applications.All PD15-M models are equipped with our PTS "push to set" technology. As a retrofit for theJackson 1285/95 & Kawneer 1686/1786 series models are designed to utilize the existingmounting locations and mortise or rod & case assemblies without having to remove the door.Install this device with the confidence of knowing that the PD15-M series meets or exceeds thehigh standards of other grade 1 products.


Specifications:
Electronics
  • System protection - unit shutdown when voltage exceeds 28VDC
  • Standard - Average Current Peak: 1.3A, Average Current Hold: 170mA
  • High Torque - Average Current Peak: 2A, Average Current Hold: 250mA
  • PTS adjustment - approx. 1/4"
  • 300' Run w/ 18ga

Features:
  • Our motorized latch retraction is fast, quiet, and smooth!
  • MM4 Smart Module: On board diagnostics with audible feedback for adjustment and power issues
  • "PTS": 5 second electronic adjustment for easy post installation adjustment
  • Electric dogging rated for continuous duty - Auto re-engage if pulled from the dogged position
  • Low current draw: Compatible with most 24VDC, 1A (or greater) regulated & linear power supplies
  • Up to 300' with 2-18ga --Long wire runs with provides installer with convenience of placing the locking devicepower supply in a centralized location; i.e. the same closet as the access panel
  • 8' cable with Quick Connect for MM4 module to easily connect to power supply lead
  • The slim, compact attractive low profile design enables mounting on narrow-style doors.
  • Maintains factory dogging

Hardware:
Handing
  • Device is non-handed.
Pushbar Length
  • Standard sizes: dimensioned for 36" and 48" openings. Standard width bars can be field cut to the next smallest opening width.
  • 48" & 36" - Cutdown all the way to the pushpad
Door Thickness
  • Suits 1-3/4" standard
Projection
  • 2-5/8" when fully projected, 1-5/8"when dogged.
Stile Width
  • Minimum 2" Stile. Fits narrow, medium, and wide stile aluminum doors.
Dogging
  • Standard dogging with hex key or cylinder dogging option. Electric dogging also available.
Fasteners
  • Standard self-tapping screws
Vertical Rods
  • Top and bottom steel rods for easy adjustment
  • Standard device is adjustable for nominal door heights
Browse for more products in the same category as this item:
  • Having any trouble? Give us a call 877-412-3667

  • FAQ

    Frequently Asked Questions

Can I Buy From You?

Yes, anyone can purchase from Automatic Door and Hardware.

When Will I Receive My Order?

The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.

Does This Ship From China?

Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.

I Need This Product But Can't Find The Right Configuration?

If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.

Do you charge sales tax on any items?

Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.

Will This Work For My Application?

If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.

I Emailed A Question But Got No Response

Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.

Have Questions?

Our Experts Are Always Here To Help!

If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.

Reviews

Average Rating:
( 0 )
Empty Cart