CALL 877-412-3667 9AM - 3PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Premium Quality Architectural Storefront Door Systems Manufactured In USA
The Ranger HD architectural aluminum storefront entrance system is engineered forinterior commercial metal stud wall openings with drywall on both sides. The heavy-duty door is constructed from6063 architectural aluminum with reinforced corner block bracing and welded construction for increased strength, rigidity, and dependable commercial performance.
The door arrives factory pre-glazed with1/4" clear tempered single-pane safety glass. All supplied glass is tempered and certified for commercial safety-glazing applications. The clear interior glazing provides visibility and allows light to pass between offices, corridors, conference rooms, retail spaces, and other commercial areas.
The heavy-duty closed-back aluminum frame is designed tobutt against the prepared wall opening. It does not wrap around the drywall like a traditional hollow metal drywall frame. After the frame is installed, the contractor must trim out or finish the drywall and surrounding wall surfaces around the frame perimeter.
This complete interior entrance package includes Grade 1 commercial hardware, a10" ADA bottom rail, ADA lock indicator, adjustable hydraulic closer, accessible pull-and-push hardware, heavy-duty pivots, a substantial frame-mounted door stop, and full-perimeter pile seals.Made in USA with an approximate 3–4 week production time.
The door arrives welded, pre-glazed, and prepared for the selected hardware. The closed-back frame ships knocked down and must be assembled and installed at the job site.
Metal stud framing, structural reinforcement, drywall, corner bead, trim, finish materials, anchors, shims, perimeter sealant, and wall-finishing materials are supplied by others.
This Ranger HD entrance is configured for installation ininterior commercial metal stud wall openings finished with drywall on both sides. It is ideal for offices, conference rooms, medical facilities, schools, retail interiors, corridors, tenant improvements, and other commercial spaces that require a durable architectural glass entrance.
The wall opening must include properly reinforced metal framing around the jambs and header. The aluminum frame is positioned within the prepared opening and secured to approved structural backing or reinforced framing.
The storefront frame is not a substitute for reinforced wall framing. The opening and surrounding metal stud construction must be properly reinforced before installation.
The Ranger HD frame is abutt-style architectural aluminum storefront frame. It is installed within the prepared wall opening with the frame face positioned against or aligned with the finished wall surface.
This frame does not have drywall returns and does not wrap around the wall thickness. Because of this, the installer must coordinate the frame location with the drywall installation and complete the surrounding finish after the frame is anchored.
The final wall-to-frame transition is completed by others. Trim, drywall finishing, corner bead, sealant, and decorative finish materials are not included with the entrance package.
The wall opening must be adequately reinforced to support the aluminum frame, door weight, closer forces, repeated operation, and commercial hardware loads. Standard light-gauge drywall studs may require additional reinforcement.
Wall reinforcement, backing, anchor selection, and attachment design are supplied and verified by others. Requirements vary based on entrance size, wall construction, hardware, and project conditions.
Because this Ranger HD entrance is configured for an interior commercial application, it includes1/4" clear tempered single-pane safety glass rather than exterior insulated Low-E glazing.
The clear glass provides visibility between interior spaces and allows natural and artificial light to pass through the entrance. The glass is factory installed in the welded aluminum door before shipment.
This interior configuration includes 1/4" clear tempered single-pane safety glass. Exterior Ranger HD systems include 1" Low-E insulated double-pane tempered safety glass.
This product is configured for an interior commercial metal stud wall with drywall on both sides. Other wall types, glass packages, hanging methods, and hardware options require the appropriate Ranger HD configuration.
| Brand / Series | Ranger HD |
|---|---|
| Product Type | Architectural aluminum commercial glass storefront entrance system |
| Nominal Door Size | 36" x 84" |
| Exact Frame Size | 39-1/2" wide x 85-3/4" high |
| Recommended Rough Opening | 40" wide x 86" high |
| Handing | RH |
| Application | Interior commercial entrance |
| Wall Type | Interior metal stud wall with drywall on both sides |
| Frame Installation Style | Butt-style frame installed within the prepared wall opening |
| Frame Wall Return | None; frame does not wrap around the drywall |
| Required Wall Finish | Drywall, trim, corner bead, reveal, or other finish completed around frame by installer |
| Required Wall Support | Reinforced metal studs or approved structural backing at anchor locations |
| Door Material | Heavy-duty 6063 architectural aluminum |
| Door Construction | Reinforced corner block and welded construction |
| Door Assembly | Factory welded |
| Frame Construction | Heavy-duty closed-back aluminum frame |
| Frame Configuration | Knocked down for on-site assembly |
| Door Stop | Heavy-duty frame-mounted stop |
| Perimeter Seals | Full-perimeter pile seals |
| Glass | 1/4" clear tempered single-pane safety glass |
| Glass Certification | Tempered and certified commercial safety glazing |
| Glazing | Factory pre-glazed |
| Bottom Rail | 10" ADA bottom rail |
| Lock | Heavy-duty Grade 1 storefront deadbolt |
| Lock Indicator | ADA locked and unlocked status indicator |
| Closer | Adjustable ADA-compliant commercial hydraulic closer |
| Hanging Hardware | Heavy-duty top and bottom pivots |
| Alternative Hanging Options | Offset pivots, butt hinges, continuous hinges, or center-hung pivots |
| Operating Hardware | Solid aluminum pull handle and push bar |
| Finish | Dark bronze anodized |
| Origin | Made in USA |
| Production Time | Approximately 3–4 weeks |
Ranger HD is designed for contractors, architects, building owners, and facility managers who need a stronger and more customizable interior glass entrance than a basic value-engineered storefront door package.
Final ADA, building-code, structural, anchoring, and wall-finishing compliance depends on the complete installed condition. The architect, contractor, installer, building owner, and authority having jurisdiction should verify all project-specific requirements.
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
