CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Shop Tucker Auto-Mation SW10 and SW19 automatic door openers for commercial swing door applications. These automatic door operators are engineered to provide dependable powered door operation for commercial entrances requiring accessibility, low-energy operation and integration with modern activation and access-control equipment.
Tucker Auto-Mation automatic swing door operators can be used on a variety of commercial entrance types, including hollow metal steel doors, aluminum storefront doors, commercial glass doors and solid-core wood doors. Depending on the selected configuration, systems can be set up for push-side outswing or pull-side inswing applications.
Whether you are installing a new automatic entrance, upgrading an existing commercial doorway or servicing a Tucker Auto-Mation system, the SW10 and SW19 platforms provide a versatile automatic swing door solution for commercial facilities.
The Tucker Auto-Mation SW10 is part of the Tucker commercial automatic swing door operator family and is designed for powered commercial entrance applications. The SW10 platform combines an electromechanical drive with electronic controls to provide automatic operation while retaining the ability to function as a manual swing door.
The SW10 can be integrated with compatible handicap push buttons, wireless activation devices, safety sensors, electric locking hardware and access-control equipment to create a complete commercial automatic entrance system.
The Tucker Auto-Mation SW19 is a commercial low-energy automatic swing door operator designed for accessible commercial entrances. Its non-handed configuration provides installation flexibility for both push and pull applications.
The SW19 incorporates a microprocessor-based control system and electromechanical drive with adjustable operating parameters. It can be integrated with compatible activation devices, electric locks, access control, safety equipment and fire alarm systems.
Low-energy automatic swing door operators are commonly used to provide accessible entry for pedestrians who may have difficulty manually opening a commercial door. A compatible knowing-act activation device, such as a wall-mounted handicap push plate, can signal the automatic operator to begin its opening cycle.
The Tucker SW19 is designed around ANSI/BHMA A156.19 low-energy automatic door operation. Opening speed, closing speed and hold-open time can be configured for the requirements of the entrance and applicable installation.
Tucker Auto-Mation swing operators provide installation options for different commercial door handings and swing directions. Selecting the proper arm configuration is important when matching the operator to the doorway.
| Application | Typical Configuration |
|---|---|
| Push / Outswing | Push arm configuration for applicable outswing commercial doors |
| Pull / Inswing | Pull or slide-track arm configuration for applicable inswing commercial doors |
Tucker Auto-Mation swing door operators can be configured for both single-door and double-door commercial entrances.
A single-door system provides powered operation for one commercial swing door. For paired openings, dual operator configurations can automate both leaves of the entrance and provide simultaneous pair operation where required by the application.
| Configuration | Application |
|---|---|
| Single Door | One automatic swing door operator for a single commercial door |
| Dual / Double Door | Two operator assemblies for automatic operation of paired commercial doors |
Tucker SW10 and SW19 automatic swing door operators can be used across a wide variety of commercial and institutional facilities, including:
Tucker Auto-Mation automatic door operators can be integrated with a variety of compatible activation devices depending on the entrance requirements.
Automatic door operation often requires the door to be electrically unlocked before the operator begins its opening cycle. Tucker automatic swing door operators can be integrated with compatible electric locking hardware and access-control equipment for these applications.
Common configurations can include electric strikes for cylindrical lever locks, electric strikes for rim exit devices, magnetic locks and compatible access-control systems. The exact hardware required depends on the door, frame, locking hardware and desired sequence of operation.
| Specification | SW19 |
|---|---|
| Input Power | 115 VAC, 60 Hz |
| Motor | 24 VDC Permanent Magnet Motor |
| Operator Header Height | Approximately 4-1/2" |
| Operator Header Depth | Approximately 4-7/8" |
| Standard Door Widths | 36", 42", 44" and 48" |
| Typical Adjustable Swing | 80° to 140° |
| Configuration | Non-handed; push or pull applications |
From a single ADA accessible entrance to a paired commercial doorway, Tucker Auto-Mation SW10 and SW19 automatic door openers provide a versatile platform for commercial swing door automation. Choose the operator configuration, arm type, activation equipment and locking hardware required for your specific entrance.
Email [email protected] or call 877-412-3667 with the product you are interested in, the quantity, and any other requirements you may have. One of our specialists will email you back a free quotation shortly. Did you know we offer free design help? If you are unsure of the product you need, but know the scope of what function or application you need, our design team can help! Contact us with your inquiry today.
