CALL 877-412-3667 9AM - 3PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Premium Quality Architectural Storefront Door Systems Manufactured In USA
The Ranger HD architectural aluminum storefront entrance system is engineered forinterior concrete block and CMU masonry wall openings in commercial buildings. The heavy-duty door is constructed from6063 architectural aluminum with reinforced corner block bracing and welded construction for increased strength, rigidity, and dependable commercial performance.
The door arrives factory pre-glazed with1/4" clear tempered single-pane safety glass. All supplied glass is tempered and certified for commercial safety-glazing applications. The interior glazing provides a clean, open appearance while allowing visibility and natural light between interior commercial spaces.
This complete interior entrance package includes a heavy-duty closed-back aluminum frame, Grade 1 commercial hardware, a10" ADA bottom rail, ADA lock indicator, adjustable hydraulic closer, accessible pull-and-push hardware, heavy-duty pivots, and a substantial frame-mounted door stop.Made in USA with an approximate 3–4 week production time.
The door arrives welded, pre-glazed, and prepared for the selected hardware. The closed-back frame ships knocked down and must be assembled and installed at the job site.
Masonry anchors, shims, backing materials, perimeter sealant, and other wall-installation materials are supplied by the installer.
This Ranger HD entrance is configured for installation ininterior concrete block or CMU masonry openings. It is ideal for commercial buildings that require a durable glass entrance between interior spaces while maintaining visibility, natural light, controlled access, and dependable door operation.
The heavy-duty closed-back frame is assembled at the job site, positioned within the prepared masonry opening, and secured with anchors selected for the specific block construction and project conditions.
The storefront frame is not a substitute for a structurally sound wall opening. The masonry opening and surrounding construction must be inspected and prepared before installation.
Because this Ranger HD entrance is configured for an interior commercial application, it includes1/4" clear tempered single-pane safety glass rather than exterior insulated Low-E glazing.
The clear glass provides visibility between interior spaces and allows natural and artificial light to pass through the entrance. The glass is factory installed in the welded door before shipment.
This interior configuration includes 1/4" clear tempered single-pane safety glass. Exterior Ranger HD systems include 1" Low-E insulated double-pane tempered safety glass.
This product is configured for an interior concrete block or CMU masonry wall. Other wall types, glass packages, hanging methods, and hardware options require the appropriate Ranger HD configuration.
| Brand / Series | Ranger HD |
|---|---|
| Product Type | Architectural aluminum commercial glass storefront entrance system |
| Nominal Door Size | 36" x 84" |
| Exact Frame Size | 39-1/2" wide x 85-3/4" high |
| Recommended Rough Opening | 40" wide x 86" high |
| Handing | LH |
| Application | Interior commercial entrance |
| Wall Type | Interior concrete block or CMU masonry |
| Door Material | Heavy-duty 6063 architectural aluminum |
| Door Construction | Reinforced corner block and welded construction |
| Door Assembly | Factory welded |
| Frame Construction | Heavy-duty closed-back aluminum frame |
| Frame Configuration | Knocked down for on-site assembly |
| Door Stop | Heavy-duty frame-mounted stop |
| Perimeter Seals | Full-perimeter pile seals |
| Glass | 1/4" clear tempered single-pane safety glass |
| Glass Certification | Tempered and certified commercial safety glazing |
| Glazing | Factory pre-glazed |
| Bottom Rail | 10" ADA bottom rail |
| Lock | Heavy-duty Grade 1 storefront deadbolt |
| Lock Indicator | ADA locked and unlocked status indicator |
| Closer | Adjustable ADA-compliant commercial hydraulic closer |
| Hanging Hardware | Heavy-duty top and bottom pivots |
| Alternative Hanging Options | Offset pivots, butt hinges, continuous hinges, or center-hung pivots |
| Operating Hardware | Solid aluminum pull handle and push bar |
| Finish | Clear anodized |
| Origin | Made in USA |
| Production Time | Approximately 3–4 weeks |
Ranger HD is designed for contractors, architects, building owners, and facility managers who need a stronger and more customizable interior glass entrance than a basic value-engineered storefront door package.
Final ADA and building-code compliance depends on the complete installed condition. The architect, contractor, installer, building owner, and authority having jurisdiction should verify all project-specific requirements.
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
