CALL 877-412-3667 9AM - 3PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Premium Quality Architectural Storefront Door Systems Manufactured In USA
The Ranger HD Medium Stile architectural aluminum storefront entrance system is engineered for commercial buildings that require greater strength and durability than a traditional narrow stile storefront door.
Designed for moderate to heavy pedestrian traffic and increased abuse environments, the Ranger HD Medium Stile door features a 3-1/2" vertical stile, 3-1/4" top rail, and 10" ADA bottom rail. Its wider aluminum rails provide increased rigidity, improved hardware support, and greater resistance to twisting, flexing, and daily commercial abuse.
The door is constructed from 6063 architectural aluminum with reinforced corner blocks and welded construction for increased strength and dependable commercial performance.
This complete entrance package includes a heavy-duty closed-back aluminum frame, factory pre-glazed tempered safety glass, Grade 1 commercial hardware, ADA lock indicator, adjustable commercial hydraulic door closer, full-perimeter pile weather seals, low-profile threshold, and bottom sweep.
Made in USA with an approximate 3–4 week production time.
The Ranger HD Medium Stile storefront entrance is designed for applications where a standard 2" narrow stile door may not provide enough strength for the expected traffic level or operating environment.
The 3-1/2" vertical stiles provide additional aluminum around the lock, pivots, hinges, closer, and other operating hardware. This creates a stronger and more rigid door assembly that is better suited for frequent use and increased physical abuse.
A 3-1/4" top rail provides increased support at the top of the door, while the standard 10" bottom rail strengthens the lower portion of the door and provides a smooth lower surface for accessibility applications.
The result is a durable architectural aluminum entrance that maintains the clean appearance of a commercial glass storefront while providing increased strength for demanding commercial applications.
The door arrives welded, pre-glazed, and prepared for the selected hardware. The closed-back frame ships knocked down and must be assembled and installed at the job site.
Ranger HD storefront entrances are available in Narrow Stile, Medium Stile, and Wide Stile configurations. The proper stile width should be selected based on the expected pedestrian traffic, abuse level, hardware requirements, and building application.
| Feature | Narrow Stile | Medium Stile | Wide Stile |
|---|---|---|---|
| Vertical Stile Width | 2" | 3-1/2" | 5" |
| Top Rail Height | Standard narrow stile top rail | 3-1/4" | 5-1/8" |
| Bottom Rail Height | 10" | 10" | 10" |
| Traffic Level | Standard traffic | Moderate to heavy traffic | Heavy traffic |
| Abuse Level | Standard abuse environments | Moderate to increased abuse environments | Heavy abuse environments |
| Appearance | Slim architectural appearance with maximum glass area | Balanced appearance with increased strength | Substantial appearance with maximum rail strength |
| Hardware Support | Standard commercial hardware | Increased support for locks, hinges, pivots, closers, and access-control hardware | Maximum support for demanding commercial hardware applications |
| Typical Applications | Retail stores, offices, restaurants, and standard commercial entrances | Busy retail stores, office buildings, medical facilities, churches, municipal buildings, industrial facilities, and other demanding commercial entrances | Institutions, schools, universities, government buildings, transportation facilities, and other heavy-traffic or heavy-abuse environments |
| Recommended Use | Applications where a slim profile and standard commercial durability are preferred | Applications requiring more strength than a narrow stile door without the larger profile of a wide stile door | Applications requiring maximum durability and resistance to heavy traffic and abuse |
The Medium Stile configuration offers an excellent balance between the slim appearance of a Narrow Stile door and the maximum strength of a Wide Stile door.
A Medium Stile storefront door is an excellent choice when a commercial entrance requires more strength than a traditional narrow stile door but does not require the larger rails of a wide stile institutional entrance.
The Ranger HD Medium Stile storefront entrance is recommended for commercial buildings where frequent use, increased traffic, or additional abuse resistance is expected.
For institutions, schools, universities, government buildings, transportation facilities, and other applications exposed to consistently heavy traffic or heavy abuse, consider the Ranger HD Wide Stile entrance with 5" vertical stiles and a 5-1/8" top rail.
Select the appropriate Ranger HD configuration for the required wall type, glass package, hanging method, hardware, handing, and entrance design.
| Brand / Series | Ranger HD |
|---|---|
| Product Type | Medium Stile architectural aluminum commercial glass storefront entrance system |
| Traffic Rating | Moderate to heavy commercial traffic |
| Abuse Rating | Moderate to increased abuse environments |
| Door Material | Heavy-duty 6063 architectural aluminum |
| Vertical Stile Width | 3-1/2" |
| Top Rail Height | 3-1/4" |
| Bottom Rail Height | 10" |
| Door Construction | Reinforced corner block and welded construction |
| Frame Construction | Heavy-duty closed-back aluminum frame |
| Frame Configuration | Knocked down for on-site assembly |
| Door Stop | Heavy-duty frame-mounted door stop |
| Weather Seals | Full-perimeter pile weather seals for exterior applications |
| Exterior Glass | 1" Low-E insulated double-pane tempered safety glass |
| Interior Glass | 1/4" clear tempered single-pane safety glass |
| Glazing | Factory pre-glazed |
| Lock | Heavy-duty Grade 1 storefront deadbolt |
| Lock Indicator | ADA locked and unlocked status indicator |
| Closer | Adjustable commercial hydraulic door closer |
| Hanging Hardware | Selected commercial pivot, hinge, or continuous hinge system |
| Operating Hardware | Solid aluminum pull handle and push bar |
| Threshold | Low-profile commercial saddle threshold for exterior applications |
| Bottom Seal | Commercial door sweep for exterior applications |
| Standard Finish | Clear anodized |
| Optional Finish | Dark bronze anodized and additional architectural finishes by quotation |
| Origin | Made in USA |
| Production Time | Approximately 3–4 weeks |
Ranger HD is designed for contractors, architects, facility managers, and building owners who need a stronger and more customizable entrance than a basic value-engineered storefront package.
Final accessibility and code compliance depend on the complete installed condition. The architect, contractor, installer, building owner, and authority having jurisdiction should verify all project-specific requirements.
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
