• CALL 877-412-3667 9AM - 3PM CENTRAL

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

USA Company
Located in Texas

Home >
ET15CVR Electrified Storeroom Trim With Key Override, 6 Pin C Keyway Mortise Cylinder, For PD15-M-CVR, Jackson 1285 and Kawneer 1686 Exit Devices

*Generic Image, Refer to Description for Model and Finish

ET15CVR Electrified Storeroom Trim With Key Override, 6 Pin C Keyway Mortise Cylinder, For PD15-M-CVR, Jackson 1285 and Kawneer 1686 Exit Devices

Automatic Door and Hardware
$

Item Return Policy: Assembled Per Order, Non-Returnable
Part Number: DCET15CVR
Usually Ships in 3-5 Business Days

FREE SHIPPING ON ORDERS OVER $200

DC USA Approved ET15CVR Electrified Storeroom Trim With Key Override, 6 Pin C Keyway Mortise Cylinder, For PD15-M-CVR, Jackson 1285 and Kawneer 1686 Exit Devices


The DC USA Approved ET15 exit trim is perfect for storefront conditions or applications where electric pullback of the exit device's latchbolt(s) is cost prohibitive or not required. This is especially practical in applications where fire/life safety codes require a fail safe condition which is not an option with electrified latch pullback devices. Because the current draw is quite low there is no need for a more expensive power supply to provide the surge current. The ET16 is the mechical version, which is also available. The ET15/16 is compatible with the DC USA Approved PD15, Jackson 1200 series & AHT 8000 and 9000 series devices.

The DC USA Approved electronic ET15 exit trim is perfect for stairwell conditions orapplications where electric pullback of the exit device's latchbolt is cost prohibitiveor not required. This is especially practical in applications where fire/life safety codesrequire fail safe condition which is not an option with electrified latch pullbackdevices. Because the current draw is quite low there is no need for a more expansivepower supply to provide the surge current.

ET15EL - storeroom (fail safe): Outside lever locked (EL) electronically. Switched power allows outsidelever to retract latch(es). Outside key momentarily unlocks outside lever toretract latch(es). Inside push pad is always free for immediate egress.

ET15EU-storeroom (fail secure):Outside lever unlocked (EU) electronically. Switched power allows outsidelever to retract latch(es). Outside key momentarily unlocks outside lever toretract latch(es). Inside push pad is always free for immediate egress.

Features:
  • Continuous duty solenoids used to insure trouble-free operation
  • Internally mounted solenoid to ease installation (no special door prep required)
Options:
  • Available Fail Safe (Electrically Locked) or Fail Secure (Electrically Unlocked)
  • Voltage options - 12V or 24V (AC/DC)
  • REE - Request to Enter switch available
  • CRU2 - Current Reduction Unit to improve solenoid life in continuously on applications
  • CRU2i - The intelligent CRU2: automatically detects DC input voltage between 12 to 30 volts and converts it to operate our 12V exit trims. Additionally, it adjusts the current to the solenoid allowing the exittrim to run cooler and last longer without any manual adjustments.
Specifications:
  • Operating Voltage - 12 or 24VAC/DC (+or- 10%) (must specify 12 or 24 volts when ordering)
  • Amperage - 12V = 250 mA / 24V = 150 mA
  • Solenoid coil resistance - 12V = 49 Ohms / 24V = 159 Ohms

Browse for more products in the same category as this item:
  • Having any trouble? Give us a call 877-412-3667

  • FAQ

    Frequently Asked Questions

Can I Buy From You?

Yes, anyone can purchase from Automatic Door and Hardware.

When Will I Receive My Order?

The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.

Does This Ship From China?

Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.

I Need This Product But Can't Find The Right Configuration?

If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.

Do you charge sales tax on any items?

Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.

Will This Work For My Application?

If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.

I Emailed A Question But Got No Response

Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.

Have Questions?

Our Experts Are Always Here To Help!

If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.

Reviews

Average Rating:
( 0 )
Empty Cart