Commercial Steel Door and Frame, 36 Inch x 84 Inch Security Door With Magnetic Lock and Key Pad Access Control System

When it comes to building security, you need a commercial door that is heavy duty and will prevent break ins. Robbers, thieves, and vandals prey on buildings with lower cost doors. Although commercial glass doors are appealing, a simple breaking of the glass, allows complete access to your building. Wood doors are also a choice, however with a simple axe, a wood door can be chopped apart. There is no better security door than a steel door. Our Gladiator security steel doors are top of the line and include anti-break in features that the competition does not. This includes non-removable pin hinges, so robbers cannot remove the hinges and take the door off of the frame. Also included is hinge reinforcement so the hinges cannot be hammered off of the door. The heavy duty steel door and frame also features lock and strike reinforcement helping to prevent break ins. Additional security hardware is available like latch guards or security astragals. Gladiator security steel doors are the best choice in building security.

A magnetic lock access control system is integrated into the security steel door. It features 2 modes of operation, a normal business hour operation mode, and an after hours secure mode.

Modes Of Operation

Business Hours Operation

In this mode of operation, the system on/off switch is set to the "off" position. The magnetic locks are "off" and in the unlocked position during the day. Pedestrians can enter the door freely, without having to use the key pad for access. *Note that if the steel door has a keyed entry lever handle, this will also need to be unlocked in order for pedestrians to enter the door.

How To Enter: The door is unlocked, pedestrians can pull the door open to enter.

How To Exit: The door is unlocked, pedestrians can push the door open to exit.

After Hours Operation

How To Enter: Pedestrians must have an authorized pin code to gain access. He or she will press the authorized pin code into the key pad. This will automatically unlock the magnetic lock, allowing he or she to use the lever handle. *Note that if the steel door has a keyed entry lever handle, this will also need to be unlocked in order for pedestrians to enter the door.

How To Exit: All pedestrians will exit the building by pushing exit button and activating the overhead sensor, this will deactivate the maglock, allowing the door to be pushed open.

Gladiator Security Steel Door System Includes

• 1 Each Gladiator Commercial 18 Gauge Heavy Duty Security Steel Door
• 1 Each Gladiator Commercial 16 Gauge Heavy Duty Steel Security Masonry Knock Down Frame
• Commercial Heavy Duty Ball Bearing Hinges
• 1 Each Heavy Duty Door Closer
• 2 Each Heavy Duty Bottom Protection Kick Plates (Exterior & Interior Side)
• 1 Each Commercial Heavy Duty Cylindrical Lock
• 1 ADA Bottom Threshold
• 1 Each Door Frame Bulb Weather Stripping
• 1 Each Vinyl Bottom Sweep (Exterior Side)
• 1 Each Top Rain Drip (Exterior Side)
• 1 Each Warhawk Electromagnetic Lock, UL Listed
• 1 Each Warhawk Power Supply, UL Listed
• 1 Each Warhawk Push To Exit Button, UL Listed
• 1 Each Warhawk Request To Exit Sensor, UL Listed
• 1 Each Warhawk Standalone Key Pad, UL Listed, Weather Proof
• 1 Each Warhawk On/Off System Switch, UL Listed
• 1 Complete Wiring Matrix Diagram

Security Cylindrical Lock Functions

• Entrance: Latchbolt operated by lever from either side. Outside lever locked by turn button from inside. Unlocked by key from outside or rotating inside lever.
• Storeroom: Latch operated by rotating inside lever or key in outside lever. Outside lever always fixed.
• Privacy: Latchbolt operated by lever from either side. Outside lever unlocked by push button on inside. Unlocked by emergency release on outside, rotating inside lever.
• Passage: Latchbolt operated by lever from either side at all times.
• Classroom: Latchbolt operated by lever from each side. Outside lever locked or unlocked by key from outside. Inside lever always operates latch.

Gladiator Security Steel Door System Features

• Commercial 18 Gauge Steel Door Construction - Heavy Duty
• Commercial 16 Gauge Steel Frame Construction - Heavy Duty
• Galvannealed Door and Frame To Prevent Rust
• Rust Inhibiting Primer Is Baked On To Each Door and Frame
• Fully Insulated Door Body With Polystyrene Core
• Insulated Core Ensures Energy Efficiency For Any Application
• Commercial 12-Gauge Closer Reinforcement - Any Manufacturer's Door Closer Can Mount To Our Door or Frame!
• Commercial 7-Gauge Hinge Reinforcement On Door and Frame - Prevent Hinges From Being Hammered Off
• Durable 16 Gauge Galvanized Flush Top Cap - Provides Integrity To Door Helping To Prevent Robbers From Bending The Door To Sneak In
• Durable 16 Gauge Galvanized Inverted Bottom Cap - Strengthens The Overall Structure Of Our Door To Help Prevent Thieves From Using Pry Bars At The Bottom Of The Door
• Additional Security Hardware Available Such As Security Door Closers, Kick Plates, Latch Guards, Security Astragals, and much more.

Installing The Maglock & Key Pad

The magnetic lock is installed at the top of the non-key side of the door frame. The armature plate attaches to the top of the non-key side of the door. The power supply with controller is installed above or near the steel door. A request to exit sensor is mounted to the top of the door frame on the non-key side. A request to exit button is installed on the non-key side of the door. On the key side of the steel door, the keypad is installed. A system on/off switch is installed on the non-key side of the door. All components are wired together following the provided wiring diagram or matrix.

Gladiator Security Steel Door and Frame Cut Sheet Download

• Gladiator Security Steel Door and Frame Cut Sheet

For more shipping information please see click here.