CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
*Commercial Door Not Included. Automatic Door Opener Only.
Want to automate a commercial door without requiring users to physicallypress a push button?TheMaverick HA8LP Touch-Free Automatic Door Opener Packagecombines our low-profile commercial automatic swing door operator withtwo wireless touch-free activation switchesfor convenient, hands-free door activation.
Instead of physically pressing a handicap push plate, users simplywave a hand in front of the touch-free activation switchto signal the Maverick HA8LP to automatically open the door.
This makes the package an excellent solution forcommercial restrooms, hospitals, medical facilities, officesand other locations where reducing unnecessary contact with shared surfaces is desirable.
The Maverick HA8LP is ourstandard-duty low-profile automatic door operatorfor the majority of typical commercial automatic door applications.It is designed for commercial swing doors weighing up to300 lbs.
Its compact4-1/8" x 5-1/8" low-profile headerprovides a clean architectural appearance while deliveringcommercial-grade automatic door performance.
This package combines the primary components needed to addwireless touch-free activationto a compatible commercial swing door.
The two touch-free activation devices allow an activation switch to bepositioned oneach side of the doorway,providing touch-free automatic door activation when entering or exiting.
Door and frame are not included with this package.
Traditional handicap activation switches require the user to physicallypress a push plate or button.
This Maverick HA8LP package replaces physical push-button activation withtouch-free wave-to-open switches.
When a user waves a hand in front of the activation switch, the switchsends an activation signal wirelessly to the receiver connected to the HA8LP.The automatic door operator then begins its programmed opening cycle.
This provides convenient automatic door operation without requiringthe user to touch the activation device.
Commercial restrooms are one of the most useful applications fortouch-free automatic door activation.
Users can activate the automatic door without needing to grab a door handleor press a shared activation button.
With one touch-free switch located on each side of the opening,the automatic door can providehands-free activation for both entering and exiting the restroom.
This makes the system especially useful for:
Touch-free door activation can also be beneficial inhospitals, clinics, medical offices and other healthcare environmentswhere reducing unnecessary contact with commonly touched surfaces is desirable.
The wireless touch-free activation switches allow users to initiate theautomatic opening cycle with a hand wave instead of physically pressingan activation plate.
Applications can include:
Many commercial doors and activation buttons are touched by numerouspeople throughout the day.
Atouch-free automatic door activation systemcan help reduce the need for users to physically contact a sharedactivation switch.
This makes the package particularly attractive for facilities focused ontouch-free access, hygiene and reducing unnecessary contact with shared surfaces.
The touch-free switches should be considered one component of the facility'soverall hygiene and infection-control practices and are not represented aspreventing or eliminating disease transmission.
The touch-free activation switches included with this package should bemounted indoors and protected from direct sunlight.
Direct sunlight can affect the operation of touch-free activation sensorsand may result in unintended or inconsistent activation.
For this reason, this package is especially well suited forinterior doors, restrooms, hospitals, medical facilities,offices and other indoor commercial applications.
Do not position the touch-free activation switches where direct sunlightwill shine onto the sensor.
For exterior applications or locations where the activation device will beexposed to direct sunlight, a different activation device may be more appropriate.
The touch-free switches communicate with the automatic door system throughwireless transmitters and a receiver,reducing the need to run activation wiring from each switch location backto the automatic door operator.
Each touch-free switch activates its wireless transmitter, which sends theactivation signal to the receiver connected to the Maverick HA8LP.
This makes the package particularly useful for retrofit installations whererunning new activation wiring through existing walls may be inconvenient.
TheMaverick HA8LPis designed to be our standard-duty automatic swing door operator for themajority of typical commercial applications.
With capacity for commercial doors weighing up to300 lbs.,the HA8LP provides an excellent balance of commercial-grade construction,dependable operation and compact operator size.
For exceptionally heavy doors or highly demanding high-volume institutionalapplications requiring additional capacity, consider theMaverick HA8SP Ultra Heavy Duty Automatic Door Operator.
One of the primary advantages of the Maverick HA8LP is its compact4-1/8" x 5-1/8" operator header profile.
The low-profile housing provides a cleaner architectural appearance andrequires less vertical mounting space above the door than larger-profileautomatic door operators.
This makes the HA8LP especially attractive for commercial applicationswhereoperator clearance and architectural appearance matter.
The Maverick HA8LP is not limited to one specific commercial door type.When properly selected and installed for the opening, the operator can beused with a variety of commercial swing doors.
The door and frame are not included with this automatic door opener package.
The Maverick HA8LP uses anon-handed / universal operator platformand can be configured for different commercial swing door applicationswhen supplied with the appropriate arm assembly.
Push-side / outswing applicationsuse the appropriate push arm assembly so the operator pushes the door open.
Pull-side / inswing applicationsuse the appropriate track arm assembly so the operator pulls the door open.
Be sure to select the correct door handing and arm configuration for yourspecific opening when ordering.
The Maverick HA8LP is built around a commercial-grade electromechanicaldrive system designed for dependable long-term automatic door operation.
The HA8LP combines commercial mechanical construction with digital controlsdesigned for flexible automatic door applications.
The touch-free activation package can also be incorporated into compatiblecommercial access-control applications.
The HA8LP includes abuilt-in strike / mag lock relayfor use with compatible electric locking hardware.
When properly configured, an appropriate electric locking device can releasebefore the HA8LP begins the automatic opening cycle.
This allows the automatic operator to be incorporated into applicationsusing compatible:
Electric locks and access control equipment are not included with this packageunless specifically stated.
| Model | Maverick HA8LP |
| Package Type | Single Door Touch-Free Automatic Door Opener Package |
| Activation | Wireless Touch-Free / Wave-to-Open |
| Touch-Free Activation Switches | 2 |
| Recommended Activation Switch Location | Indoor / Protected from Direct Sunlight |
| Operator Type | Low Profile Low Energy Automatic Swing Door Operator |
| Recommended Duty | Standard Duty Commercial Applications |
| Maximum Door Weight | Up to 300 lbs. |
| Header Profile | 4-1/8" x 5-1/8" |
| Motor Type | Electromechanical |
| Motor | 1/8 HP |
| Operating Voltage | 115 VAC |
| Drive Train | Aluminum-Alloy Gearbox |
| Bearings | Heavy-Duty Sealed Bearings |
| Gear Lubrication | Permanent Lubrication / High-Wear-Protection Gear Grease |
| Control System | Digital Control Board |
| Operator Handing | Non-Handed / Universal |
| Arm Connection | 1" Solid Spline Spindle |
| Mechanical Clutch | Standard |
| Adjustable Spring Tension | Yes |
| Adjustable Door Stop | Yes |
| On / Off / Hold Open Switch | Yes |
| Electric Lock Interface | Built-In Strike / Mag Lock |
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
