CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
*Commercial Door Not Included. Automatic Door Opener Only.
The Maverick HA8LP California Automatic Door Opener Kit is specificallyconfigured for commercial automatic door installations in California. This completepackage combines the Maverick HA8LP low-energy automatic swing door operator withCalifornia-style 36" tall wireless handicap activation switchesto provide a complete automatic door accessibility solution for California projects.
If you are installing an automatic door in California, renovating a California commercialbuilding, or are a contractor specifying accessibility equipment for a California project,this is the Maverick HA8LP package designed specifically for your application.
California accessibility requirements deserve a package specifically configured aroundCalifornia commercial automatic door installations.
Instead of purchasing a standard automatic door opener package and then sourcing theappropriate California-style activation equipment separately, this kit combines theMaverick HA8LP with two 36" tall wireless activation switches.
For California contractors, facility managers, building owners, and installers, thispackage provides a convenient starting point for a properly designed Californiaaccessible automatic door opening.
The defining feature of this package is the pair of36" tall accessibility activation switches. These large verticalactivation devices provide a substantial activation surface and are intended foraccessible commercial automatic door installations.
Their large vertical activation area makes the automatic entrance easier to activatefor a wide range of users, including wheelchair users and individuals who may havelimited reach or mobility.
Two activation switches are included so an accessible automatic activation point canbe installed on each side of the doorway.
The 36" tall activation switches communicate wirelessly with the Maverick HA8LPthrough the included transmitters and receiver.
Wireless activation can simplify retrofit installations by reducing the need to routeactivation wiring from each 36" switch back to the automatic door operator.
If you are a commercial door contractor, general contractor, accessibility contractor,facility contractor, or automatic door installer working on a California project,this package is specifically configured with California accessibility applicationsin mind.
Instead of ordering a standard HA8LP package with conventional square push plates andthen changing the activation equipment, this California package already includes the36" tall wireless accessibility switches.
The result is a cleaner purchasing process and a package specifically intended forCalifornia commercial automatic door projects.
California has detailed accessibility requirements for commercial door openings.A properly designed accessible entrance involves more than simply installing anautomatic door operator.
Low-energy automatic doors used in California accessibility applications must beselected and installed as part of a complete opening that addresses applicablerequirements for the automatic operator, activation controls, clear floor space,door clearances, maneuvering space, thresholds, hardware, timing, and otheraccessibility requirements.
The Maverick HA8LP provides the low-energy automatic operator platform, while theincluded 36" tall activation switches provide the California-style accessibilityactivation devices for this package.
At the heart of the California package is the Maverick HA8LP, acommercial low-energy automatic swing door operator designed for professionalcommercial automatic door applications.
The HA8LP combines a compact low-profile header with a powerful commercial drivetrain,programmable automatic door controls, activation inputs, safety inputs, and electriclock-control capability.
The Maverick HA8LP is designed for low-energy automatic swing door applications andis built around ANSI/BHMA A156.19 requirements for low-energypower-operated doors.
This is particularly important for California accessibility applications becauselow-energy and power-assisted doors are addressed under California's accessibilityrequirements.
A manually operated commercial door can create a significant obstacle for a wheelchairuser. The user may otherwise need to maneuver the wheelchair while simultaneouslyreaching for the door hardware and controlling the movement of the door.
The Maverick HA8LP provides powered automatic opening. When the 36" accessibilityswitch is activated, the operator performs the programmed opening cycle so the userdoes not have to manually push or pull the full weight of the commercial door.
The large activation surface also provides an easy-to-identify activation point forusers approaching the entrance.
The Maverick HA8LP California package can be used on compatible commercial swing-dooropenings throughout:
The Maverick HA8LP can be configured for many compatible commercial swing doors,including:
Door weight, width, handing, swing direction, reveal, existing hardware, lockingrequirements, and the complete accessibility requirements of the opening should bereviewed before installation.
The Maverick HA8LP includes onboard lock-control capability for integration withcompatible electric strikes, magnetic locks, electrified panic hardware, and othercommercial locking systems.
If the existing commercial door is mechanically locked or positively latched, theappropriate locking hardware must be released before the automatic operator attemptsto open the door.
Electric strikes, magnetic locks, panic hardware, card readers, and otheraccess-control equipment are not included unless specifically stated as part of thispackage.
This package is designed and configured for California accessibility applications;however, no automatic door opener kit by itself guarantees that the finisheddoor opening complies with every applicable California Building Code requirement.
Final compliance depends on the complete installation, including the door and frame,clear opening width, maneuvering clearances, activation-device location, required clearfloor space, thresholds, door hardware, operating forces, timing, signage, lockinghardware, and other requirements applicable to the specific project.
The installer, contractor, architect, and/or authority having jurisdiction should verifythe requirements for the specific California project.
If your automatic door project is located in California, this is the Maverick HA8LPpackage specifically configured for the application. Instead of starting with astandard automatic door kit and changing the activation equipment later, theMaverick HA8LP California Package already combines the commercialautomatic operator with two 36" tall wireless accessibility activation switches.
For California contractors, building owners, facility managers, and automatic doorinstallers, this package provides the right equipment foundation for a properlydesigned California accessible automatic entrance.
Questions about your California automatic door application?
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
