Maverick HA8SP Ultra Heavy Duty Double Door Automatic Opener Retrofit Package for Storefront Doors

Simultaneous Outswing Automatic Door Package for Existing Aluminum Storefront Double Doors – Includes Wireless Handicap Activation

Already have a pair of commercial aluminum storefront doors and need to make both doors automatically open together? The Maverick HA8SP Storefront Double Door Retrofit Package provides a complete automatic door solution designed to convert compatible existing storefront double doors into a simultaneous automatic entrance.

This package is built around the Maverick HA8SP Ultra Heavy Duty Double Door Automatic Operator System in a clear anodized aluminum finish. Both door leaves are designed to automatically open together as a coordinated pair.

This particular configuration is designed for a simultaneous outswing storefront door pair. The HA8SP uses push-side arm assemblies to push both storefront door leaves outward during the automatic opening cycle.

The package also includes two commercial handicap push buttons, two 433 MHz wireless transmitters, one compatible wireless receiver and two surface-mount push button boxes, giving you automatic activation from both sides of the entrance.

IMPORTANT – RETROFIT PACKAGE: This product is designed for an existing aluminum storefront double-door entrance. The storefront doors, storefront frame, glass, pivots, locks, panic hardware and other existing door hardware are not included.

What's Included with This Storefront Double Door Retrofit Package?

• 1 Maverick HA8SP Ultra Heavy Duty Double Door Automatic Operator System
• Simultaneous outswing pair configuration
• Push-side arm assemblies for both door leaves
• Clear anodized aluminum finish
• 2 Commercial Handicap Push Buttons
• 2 433 MHz Wireless Transmitters
• 1 Compatible 433 MHz Wireless Receiver
• 2 Surface-Mount Handicap Push Button Boxes
• Wireless automatic activation capability from both sides of the entrance

Not Included: Storefront doors, storefront frame, glass, pivots, hinges, deadbolts, flush bolts, panic hardware, 3-point locks, electric strikes, access control equipment or other commercial door hardware unless specifically stated otherwise.

Automate Your Existing Storefront Double Doors

If your existing aluminum storefront doors and frame are in good operating condition, replacing the entire entrance may be unnecessary just to add automatic operation.

This package is specifically designed to add the Maverick HA8SP simultaneous double-door operator and wireless handicap activation system to a compatible existing storefront entrance.

Your existing doors, frame, glass, pivots and compatible locking hardware remain part of the opening.

The HA8SP system is added above the opening to provide coordinated automatic operation across both door leaves.

One Activation – Both Storefront Doors Open Together

A double-door storefront entrance creates a different automatic door challenge than a conventional single door.

Instead of automatically opening only one leaf, this package is designed to automatically operate both storefront doors together.

When either handicap push button is activated, the wireless receiver signals the Maverick HA8SP double-door system.

Both HA8SP operators begin the automatic opening cycle and both storefront door leaves swing outward simultaneously.

After the programmed hold-open period expires, the HA8SP system controls the closing cycle and returns both door leaves to the closed position.

Compatible Storefront Locking Applications

One of the most important considerations when converting an existing storefront double-door entrance to automatic operation is the existing locking hardware.

Both door leaves must be free to swing before the Maverick HA8SP attempts to automatically open them.

This retrofit package is intended for applications where the existing storefront locking hardware can remain unlocked or mechanically released during periods of automatic operation.

Storefront Deadbolt with Flush Bolts

Many aluminum storefront double-door entrances use a deadbolt on the active door and flush bolts on the inactive door.

This type of opening can be compatible with the Maverick HA8SP double-door retrofit package provided the deadbolt is unlocked and the flush bolts are retracted so both door leaves are free to swing during automatic operation.

Concealed Vertical Rod Panic Bars with Dogging

Storefront double doors equipped with compatible concealed vertical rod panic devices can also be automated when the exit devices have an appropriate dogging feature.

When properly dogged, the vertical rod latches remain retracted and both storefront doors are free to swing automatically.

This allows the Maverick HA8SP simultaneous operator system to open both leaves without electrically retracting the panic devices during each automatic cycle.

3-Point Storefront Locks

Existing storefront entrances equipped with a 3-point locking system may also be compatible with this package as long as the lock can remain completely unlocked during periods of automatic operation.

All locking points must be released so the automatic operators are not attempting to move doors that are mechanically secured.

The Key Requirement: Both Doors Must Be Unlocked

The concept behind this package is simple:

If both existing storefront door leaves are free to swing, the Maverick HA8SP can automatically operate them as a simultaneous pair.

The existing locking system may remain on the doors, but it must be capable of being left unlocked or mechanically released while automatic operation is enabled.

If the existing lock must remain secured between automatic opening cycles, additional compatible electrified locking hardware and proper automatic unlocking controls may be required.

Need the Doors to Stay Locked Between Automatic Openings?

This standard retrofit package is intended for openings where the existing storefront locks can remain unlocked during periods of automatic operation.

If your building requires the double doors to remain mechanically locked or latched between each automatic cycle, the locking hardware must be electronically released before the HA8SP begins opening the doors.

Depending on the existing hardware, this may require compatible electrified panic hardware, electric locking devices, access control components or other specialized hardware.

Electrified locking hardware is not included with this package.

Wireless Handicap Activation from Both Sides

This package includes two commercial handicap push buttons, allowing users to activate the automatic storefront entrance from both sides of the opening.

Each handicap push button is paired with a compatible 433 MHz wireless transmitter.

When a user presses either button, the transmitter sends the activation signal to the included wireless receiver connected to the Maverick HA8SP double-door operator system.

The receiver then initiates the simultaneous automatic opening cycle.

Wireless Activation Equipment Includes:

• 2 Handicap Push Buttons
• 2 433 MHz Wireless Transmitters
• 1 433 MHz Wireless Receiver
• 2 Surface-Mount Push Button Boxes

Surface-Mount Push Button Boxes Included

Both handicap push buttons include compatible surface-mount boxes for wall installation.

Surface mounting is especially useful in retrofit applications where the existing building walls are already finished and installing recessed electrical boxes would require additional cutting or wall modification.

The surface boxes provide a clean mounting solution for the included handicap buttons on both sides of the entrance.

Reduce Activation Wiring Through Existing Walls

Running new activation wiring through an existing retail or commercial storefront can be difficult, especially when the entrance is surrounded by finished walls, masonry or completed storefront construction.

The included wireless activation system reduces the need to run activation wire from each handicap push button all the way back to the automatic door operator.

Each transmitter communicates wirelessly with the receiver at the Maverick HA8SP system, helping simplify retrofit installation.

Maverick HA8SP Ultra Heavy Duty Double Door Operator

The Maverick HA8SP is a standard-profile low energy automatic swing door operator designed for demanding commercial applications and sustained long-term use.

The double-door configuration coordinates two door leaves so the existing storefront entrance operates as a simultaneous automatic pair.

Its heavy-duty electromechanical construction, high-precision commercial gearing and cast aluminum closed gearbox provide a robust platform for busy commercial entrances.

Maverick HA8SP Features

• Designed for ultra heavy-duty commercial applications
• Built for high-traffic automatic entrances
• Simultaneous operation of both storefront door leaves
• 1/8 HP electromechanical motor design
• High-precision commercial gearing
• Cast aluminum closed gearbox
• Permanent lubrication system
• Quiet automatic operation
• Adjustable spring tension
• Helps overcome wind and building stack pressure
• Mechanical one-way clutch for easier manual operation
• Digital control system
• On-board programming
• Magnetic limit switches
• Adjustable concealed door stop
• 1-inch solid spline spindle arm connection
• On / Off / Hold Open switch
• Built-in electric lock interface
• Separate activation and safety device inputs
• Compatible with appropriate building access control systems
• Field-modifiable aluminum header

Clear Anodized Aluminum Finish

This storefront retrofit package includes the Maverick HA8SP double-door operator in a clear anodized aluminum finish.

The silver aluminum appearance coordinates well with the clear anodized finish commonly found on commercial aluminum storefront frames and doors.

Built for High-Traffic Storefront Entrances

Double storefront entrances are often installed at some of the busiest openings in a building.

Retail stores, medical facilities, schools, office buildings and other commercial properties may operate these entrances repeatedly throughout the day.

The Maverick HA8SP is designed for applications where a lighter-duty automatic operator may not provide the durability or performance desired for the opening.

Ideal Storefront Applications

• Retail stores
• Shopping centers
• Medical facilities
• Hospitals
• Schools and universities
• Office buildings
• Government facilities
• Airports
• Convention centers
• Casinos
• Restaurants
• High-traffic exterior entrances
• Existing aluminum storefront double-door entrances

Simultaneous Outswing Push-Arm Configuration

This particular storefront retrofit package is configured for a simultaneous outswing pair.

Because both storefront doors swing outward away from the operator mounting side, the HA8SP uses push-side arm assemblies.

Each operator pushes its respective door leaf outward during the automatic opening cycle.

Both leaves are coordinated so the entrance opens as a simultaneous pair.

Maverick HA8SP Double Door Technical Specifications

Common Problems This Package Solves

• Existing storefront double doors need automatic operation
• Both door leaves need to open automatically together
• Entrance experiences high daily traffic
• Customers need handicap activation from both sides of the entrance
• Existing deadbolt and flush bolts can remain unlocked during business hours
• Existing concealed vertical rod panic devices can be dogged down
• Existing 3-point locking system can remain unlocked during automatic operation
• Running handicap push button wiring through finished walls is difficult
• Surface-mount handicap buttons are preferred for retrofit installation
• Customer wants to retain the existing aluminum storefront doors and frame
• Customer wants automatic operation without purchasing an entirely new storefront entrance

Is My Existing Storefront Double Door Compatible?

The most important question is whether both existing door leaves can freely swing while the automatic system is operating.

This package can be an excellent solution for storefront double-door entrances using:

• Deadbolt with flush bolts – provided all locking points remain unlocked or retracted
• Concealed vertical rod panic bars with dogging – provided both panic devices can remain dogged during automatic operation
• 3-point storefront locks – provided all locking points can remain completely unlocked

If either door remains mechanically latched or locked, the automatic operator should not attempt to force the door open.

Keep Your Existing Storefront – Add Heavy-Duty Automatic Operation

If your storefront doors, frame and existing hardware are in good operating condition, there may be no reason to replace the entire entrance.

This retrofit package gives you the components needed to add simultaneous automatic operation and wireless handicap activation to your compatible existing storefront double-door entrance.

You keep your existing aluminum storefront doors and frame while adding the Maverick HA8SP Ultra Heavy Duty Double Door Operator System.

Maverick HA8SP Storefront Double Door Retrofit Package

Already have a pair of storefront doors? Need both doors to automatically open together? Want wireless handicap activation without replacing the entire entrance?

The Maverick HA8SP Storefront Double Door Retrofit Package combines the ultra heavy-duty simultaneous HA8SP operator system with two handicap push buttons, two 433 MHz transmitters, one wireless receiver and two surface-mount push button boxes.

Keep your existing storefront doors. Keep compatible existing locking hardware. Add simultaneous heavy-duty automatic operation.