CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Shop Kawneer 1010 Sliding Mall Front door parts and replacement hardware for commercial interior sliding storefront systems. Automatic Door and Hardware carries replacement Kawneer mall slider rollers, caster guides, head guides, guide pin assemblies and related sliding door components used to repair and maintain Kawneer mall front entrance systems.
The Kawneer 1010 Sliding Mall Front is a low-profile, multi-track aluminum sliding system designed primarily for interior commercial applications. Its parallel-stacking configuration allows multiple panels to slide and stack, making the system especially useful where a large storefront opening needs to be opened or closed without conventional swinging doors.
The Kawneer 1010 Sliding Mall Front is designed around a low-profile multi-track configuration that can be recessed or surface applied. Operable panels move along parallel tracks and can be stacked to create a wide open entrance when the storefront is open.
Although its name is closely associated with shopping mall storefronts, the system can also be used for other interior commercial applications including sliding room dividers, institutional sliding doors, interior pocket doors, educational partitions and sound-control panels.
Sliding mall front systems depend on multiple mechanical components working together to keep the panels properly supported, guided and aligned. Worn or damaged hardware can make a panel difficult to move, cause improper tracking, or prevent the entrance from operating correctly.
Roller assemblies and caster guides are important service components in a commercial sliding mall front system. These components help support and guide the movable panels as they travel along the multi-track entrance system.
If an existing mall slider becomes difficult to move, does not track correctly, or has damaged roller hardware, inspect the roller and guide assemblies for wear before replacing the entire panel or entrance.
Head guides and guide pin assemblies help maintain the proper position of the sliding panels as they move through the entrance system. Damaged, missing or heavily worn guides can contribute to excessive panel movement and poor operation.
Automatic Door and Hardware carries replacement mall slider guide components for servicing existing Kawneer sliding storefront installations.
The Kawneer 1010 system is intended primarily for interior applications. Its parallel-stacking design makes it particularly useful where a large opening needs to be secured after hours while remaining substantially open during normal business operation.
Common applications include enclosed shopping malls, retail storefronts, institutional facilities, interior room dividers, pocket-door configurations and educational partitions.
A malfunctioning Kawneer mall slider does not necessarily mean the complete storefront system needs to be replaced. Many existing entrances can be serviced by identifying and replacing the individual roller, caster, head guide, guide pin or other worn mechanical component.
Replacing the correct component can help restore smoother panel travel and extend the service life of an existing commercial mall front system.
Mall front hardware can be difficult to identify because many of the components are concealed within the sliding panel or track system. Before ordering, compare your existing hardware carefully with the replacement product.
Helpful information to verify includes:
Need additional hardware for another Kawneer entrance? Automatic Door and Hardware carries replacement Kawneer storefront door parts including locks, handles, pivots, flush bolts, door closers and other commercial entrance hardware.
Shop All Kawneer Storefront Door PartsNot sure which Kawneer mall slider roller, caster guide, head guide or replacement component you need? Contact Automatic Door and Hardware with information about your entrance and the part you are replacing. Photos of the existing hardware can also be helpful when identifying older commercial door components.
Call: 877-412-3667
Email: [email protected]
Email [email protected] or call 877-412-3667 with the product you are interested in, the quantity, and any other requirements you may have. One of our specialists will email you back a free quotation shortly. Did you know we offer free design help? If you are unsure of the product you need, but know the scope of what function or application you need, our design team can help! Contact us with your inquiry today.
