CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Hager 8300 Series Low Energy Automatic Door Opener
The Hager 8300 Series Handicap Door Opener is a commercial low-energy automatic swing door power operator designed for accessible single-door entrances. Engineered for quiet operation, easy installation and flexible programming, the Hager 8300 is an excellent solution for commercial doors requiring automatic ADA access.
The 8300 features a non-handed design that allows the operator to be configured for either push/outswing or pull/inswing applications. It can be used on fire-rated and non-fire-rated openings and on applicable exterior doors when the operator is mounted on the interior side.
With onboard accessory power, electric lock integration, adjustable opening and closing speeds, programmable hold-open time and advanced control capabilities, the Hager 8300 provides a versatile automatic entrance solution for commercial and institutional buildings.
The Hager 8300 is designed for low-energy ADA automatic door applications and is ANSI/BHMA A156.19 certified for doors up to 48" wide and 200 lbs.
A compatible knowing-act activation device, such as a handicap push button, wireless push plate or touchless actuator, can signal the operator to automatically open the door. Opening speed, closing speed and hold-open time are adjustable to meet the requirements of the installation.
Appropriate automatic door signage is included with each operator.
The Hager 8300 is non-handed, providing flexibility for commercial doors with different handings and swing directions. The proper operator arm configuration is selected according to the installation.
| Application | Configuration |
|---|---|
| Push / Outswing | Standard push arm configuration for applicable outswing doors |
| Pull / Inswing | Pull arm configuration for applicable inswing doors |
| Standard Door Widths | 36", 42", 44" and 48" |
| Maximum Door Width | Up to 5' |
| Maximum Door Weight | Up to 350 lbs. |
| ANSI/BHMA A156.19 Certified Capacity | Up to 48" wide and 200 lbs. |
| Opening Force | Less than 15 lbs. |
| Closing Force | Greater than 8 lbs. |
The Hager 8300 Series provides adjustable operating parameters for commercial entrance requirements. Standard programming includes opening and closing speed adjustment along with hold-open timing.
An optional KP EVO Programming Device (2-679-0907) is available for advanced programming functions.
| Power Requirements | 115 VAC, 60 Hz |
| Current Draw | 0.4A to 1.2A Maximum |
| Fused Protection | 3.15A Fuse |
| Onboard Power Supply | 24 VDC, 1A |
| Electric Lock Relay | 5.0A @ 28 VDC, Form C SPDT |
The Hager 8300 includes an onboard 24 VDC accessory power supply and electric lock relay, allowing the operator to be incorporated into commercial entrance systems using compatible electric locks, magnetic locks, sensors and activation devices.
Compatible activation options can include handicap push buttons, wireless activation switches, touchless actuators and other appropriate knowing-act devices.
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
