• CALL 877-412-3667 9AM - 3PM CENTRAL

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

USA Company
Located in Texas

Combination 10 in. Offset Pull Handle and 33 in. Single Bend Push Bar, 1/4-20 Mounting Hardware (Rivnut Required For Free End Of Push Bar), Dark Bronze Anodized Finish

*Storefront Door Not Included

Combination 10 in. Offset Pull Handle and 33 in. Single Bend Push Bar, 1/4-20 Mounting Hardware (Rivnut Required For Free End Of Push Bar), Dark Bronze Anodized Finish

Alumitrex
$

Item Return Policy: Assembled Per Order, Non-Returnable
Part Number: ALUMITREX-142010PPS36DU
Usually Ships in 24 Hours

FREE SHIPPING ON ORDERS OVER $200

Alumitrex Combination 10 in. Offset Pull Handle and 33 in. Single Bend Push Bar, 1/4-20 Mounting Hardware (Rivnut Required For Free End Of Push Bar), Dark Bronze Anodized Finish

This Alumitrex push bar and pull handle is used on Alumitrex brand commercial storefront entrance doors. It features 1/4-20 mounting hardware. A 1/4-20 shoulder bolt mates the push bar to the offset pull handle. The free end of the offset pull handle uses a 1/4-20 thru bolt. The free end of the push bar uses a short 1/4-20 screw designed to thread into an existing rivnut on the door.

Features

  • Standard 10" Center To Center Offset Pull Handles Available
  • Standard Push Bar Widths Available For 36" door
  • For Use On 1-3/4" Thick Commercial Aluminum Storefront Doors
  • Outside Offset Pull Handle Features a 3-1/4" Offset, 2-1/4" Projection, and 2-1/4" Door Clearance
  • Inside Push Bar Features a 2-1/4" Projection
  • 1/4-20 Heavy Duty Mounting Hardware Included
  • 1" Diameter Solid Aluminum
  • Class 1 Anodized Finish

Center To Center Measurement

The center to center measurement is the distance between the centerline of the top portion of the pull handle and the bottom portion. Refer to the product image for an illustration.

Back To Back Mounting For Connecting The Common End Of The Pull Handle To The Push Bar

The common end of the pull handle and push bar refers to the top part of the pull handle that meets or connects to the push bar. This connection point is on the lock stile of the storefront door. Back to back mounting hardware is standard for where the pull handle and push bar meet together.

Thru-Bolt Hardware For Free End Of Pull Handle and Rivnut Required For Push Bar

The free end of the pull handle refers to the bottom part of the pull handle that does not connect with the push bar. Likewise the free end of the push bar refers to the end of the push bar on the hinge or pivot stile that does not connect to the pull handle.

Thru bolt mounting uses a heavy duty thru bolt designed to connect the offset pull handle through the door. A rivnut in the door allows a shorter screw to attach the free end of the push bar into the door's rivnut.


  • Having any trouble? Give us a call 877-412-3667

  • FAQ

    Frequently Asked Questions

Can I Buy From You?

Yes, anyone can purchase from Automatic Door and Hardware.

When Will I Receive My Order?

The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.

Does This Ship From China?

Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.

I Need This Product But Can't Find The Right Configuration?

If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.

Do you charge sales tax on any items?

Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.

Will This Work For My Application?

If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.

I Emailed A Question But Got No Response

Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.

Have Questions?

Our Experts Are Always Here To Help!

If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.

Reviews

Average Rating:
( 0 )
Empty Cart