CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
Shop Arrow 7800 Series Automatic Door Parts for maintaining and repairing Arrow low energy automatic swing door operators. Automatic Door and Hardware supplies replacement operator components, mechanical parts, arm assemblies, activation accessories and related hardware for Arrow 7800 Series automatic door systems.
The Arrow 7800 combines powered automatic opening with the controlled operation of a hydraulic mechanical door closer. This electro-hydraulic design allows the opening to provide convenient ADA automatic operation while retaining smooth manual door operation and dependable mechanical spring closing.
Whether you are troubleshooting an operator, replacing a mechanical component or adding new activation equipment, use the products on this page to help repair, maintain or upgrade an existing Arrow 7800 automatic door opener.
Depending on the existing operator configuration and required repair, Arrow 7800 replacement components may include:
The Arrow 7800 Series combines an electric automatic door operator with a mechanical hydraulic door closer.
During automatic operation, the motor and operator controls provide powered opening. The hydraulic closer provides controlled mechanical closing using traditional closer spring force and hydraulic regulation.
Because the system contains both powered and mechanical components, correct troubleshooting is important before replacing parts. A problem that appears to be electrical may sometimes involve the closer, arm assembly, activation device, electric locking hardware or the door itself.
The mechanical hydraulic closer is a critical part of the Arrow 7800 automatic door system. It provides the spring force required to close the door and uses hydraulic controls to regulate door movement.
Closer-related functions include:
The powered portion of the Arrow 7800 system controls automatic opening and interfaces with the operator's activation and accessory equipment.
Depending on the repair, service may involve the motor, electronic control components, switches, power components, drive components or related wiring.
Before replacing a major electrical component, verify that the problem is not being caused by an activation device, electric lock, improper adjustment, mechanical binding or another component within the opening.
Arrow 7800 operators can be configured for push-side or pull-side mounting. The correct replacement arm components depend on the operator installation and door configuration.
Push-side installations use the appropriate Arrow operator arm configuration to push the door outward during automatic opening.
Pull-side installations use an arm and track configuration that pulls the door inward during powered operation.
Always verify the existing operator model, mounting application and arm configuration before ordering replacement arm or track components.
Correct door handing is important when identifying the installation and selecting appropriate automatic door components.
Refer to the Arrow door handing chart and verify the door from the exterior/outside of the opening before selecting application-specific components.
The Arrow 7800 Series can be integrated with multiple types of automatic door activation equipment. Depending on the installation, activation options can include:
Existing Arrow 7800 automatic door openings can be configured with compatible wave-to-open switches and touchless activation devices.
Touchless activation provides convenient hands-free automatic door operation for restrooms, medical facilities, offices and other commercial applications.
The Arrow 7800 can be integrated with compatible electric locking hardware to create a complete automatic door opening.
When properly configured, the operator can coordinate with an electric strike so the locking hardware releases before the automatic operator begins opening the door.
Electric strike configurations can be used with appropriate openings utilizing:
The Arrow 7800 Series is a low energy automatic swing door operator designed for moderate-traffic commercial applications. The operator can be used on appropriate interior and exterior doors and provides both convenient automatic operation and smooth manual door operation.
Key Arrow 7800 characteristics include:
The Arrow 7800 can be used in appropriate fire-rated door applications when the operator, door, frame, hardware and complete opening are properly specified, configured and installed for the required rating.
Automatic door operators contain a combination of electrical, mechanical and hydraulic components. Identifying the actual failed component before ordering can help avoid unnecessary parts replacement.
If you are unsure which Arrow 7800 automatic door part you need, Automatic Door and Hardware can help identify the operator component, arm assembly, activation device or electric locking hardware required for your application.
Email [email protected] or call 877-412-3667 with the product you are interested in, the quantity, and any other requirements you may have. One of our specialists will email you back a free quotation shortly. Did you know we offer free design help? If you are unsure of the product you need, but know the scope of what function or application you need, our design team can help! Contact us with your inquiry today.
