• CALL 877-412-3667 9AM - 3PM CENTRAL

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

USA Company
Located in Texas

Home >
ANSI A156.4 Door Closer

*Generic Image, Refer to Description for Model and Finish

Door Closer, American National Standards Institute ANSI A156.4 Certified

Automatic Door and Hardware
$

Item Return Policy: Assembled Per Order, Non-Returnable
Part Number: LIBCANSI
Usually Ships in 24 Hours

FREE SHIPPING ON ORDERS OVER $200

ANSI A156.4 Certified Door Closers For Commercial Doors

ANSI or American National Standards Institute is an organization that works with BHMA to provide national safety standards for commercial door hardware products. Our commercial door closer complies with ANSI A156.4 safety guide lines.







ANSI A156.4 Door Closer Features

  • ANSI A156.4 Door Closer Complies With ANSI A156.4, Grade 1, 2 million Cycles
  • ANSI A156.4 Door Closer Is UL/ULC Listed For 3 Hour Fire Rated Doors
  • ANSI A156.4 Door Closer Is Constructed From Heavy Duty Cast Aluminum
  • ANSI A156.4 Door Closers are tri-packed fro regular, top jamb, or parallel arm applications.
  • ANSI A156.4 Door Closer features an adjustable sweep, latch, and closing speed

    Door Size Options

    The door closer contains a fully adjustable spring allowing the door closer to be installed on any commercial door.
    • Size 1 To 4: For Interior Doors 32" To 48" Wide or Exterior Doors 28" To 42" Wide
    • Size 3 To 6: For Interior Doors 42" To 60" Wide or Exterior Doors 36" To 54" Wide

      ANSI A156.4 Door Closer Arm Type Options

      • The ANSI A156.4 Door Closer Is Tri-Packed, meaning it can be installed Regular, Top Jamb, or Parallel Arm


      ANSI A156.4 Door Closer Drop Plate Option

      A flat drop plate option is available for installations where there is low headroom or insufficient mounting space on the door frame.

      ANSI A156.4 Door Closer Regular Arm Installation With Drop Plate



      ANSI A156.4 Door Closer Top Jamb Installation With Drop Plate


      ANSI A156.4 Door Closer Parallel Arm Installation With Drop Plate




      ANSI A156.4 Door Closer Additional Mounting Hardware

      • Sex Nuts and Bolts: Set of 4 Each. For steel door applications.

      ANSI A156.4 Door Closer Comes Standard With Backcheck

      The adjustable back check provides a checking or cushioning effect as the door is severely thrust open, typically as it might be caught by the wind, or in violent egress by an individual. The back check helps prevent damage to the door, door hardware, or to adjacent wall surfaces. The strength of the checking action is adjustable, and when it is fully employed (not recommended) it places considerable strain on the door closer, which can result in failing or leaking. It is always best to turn out back the back check valve 1-1/2 to 2 full turns from the fully closed position for safety.


      ANSI A156.4 Door Closer Hold Open Function Available (Note Hold Open Arm Should Not Be Used On Fire Doors):

      This option allows you to add a hold open arm to the door closer. A hold open arm is an adjustable arm that allows the user to set the door to a hold open position. It is important to note that if that a hold open arm should never be used on a fire rated door closer. This option only applies if the door closer is used on a non-fire rated door.



      ANSI A156.4 Door Closer Adjustment


      ANSI A156.4 Door Closer Closing Cycle

      Note: Closing arcs (Close and Latch) are controlled by two (2) separate speed valve adjuster. Adjust the closing speed first, then adjust the latching speed.

      1. Closing speed adjustment is accomplished by full rotations of the speed valve adjuster. - Turn the speed valve screw clockwise for a slower close arc closing speed. - Turn the speed valve screw counter-clockwise for a faster close arc closing speed.

      2. Latch speed adjustment is accomplished by full rotations of the speed adjuster valve. - Turn the speed valve screw clockwise for a slower latch arc closing speed. - Turn the speed valve screw counter-clockwise for a faster latch arc closing speed.

      CAUTION!!! Do not turn speed adjuster valve more than two (2) full turns counter-clockwise from its factory default position, as the two speed valve adjusters could become dislodge from the door closer body, resulting in the loss of internal fluid and failure of the device.

      • Having any trouble? Give us a call 877-412-3667

      • FAQ

        Frequently Asked Questions

      Can I Buy From You?

      Yes, anyone can purchase from Automatic Door and Hardware.

      When Will I Receive My Order?

      The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.

      Does This Ship From China?

      Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.

      I Need This Product But Can't Find The Right Configuration?

      If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.

      Do you charge sales tax on any items?

      Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.

      Will This Work For My Application?

      If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.

      I Emailed A Question But Got No Response

      Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.

      Have Questions?

      Our Experts Are Always Here To Help!

      If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.

      Reviews

      Average Rating:
      ( 0 )
      Empty Cart