
Arrow 7800 Series Automatic Door Opener
The Arrow 7800 Series Low Energy Automatic Door Opener combines the convenience of an automatic swing door operator with the dependable performance and controlled closing action of an integrated hydraulic mechanical door closer.
Designed for ADA accessibility, moderate-traffic commercial openings and hands-free door operation, the Arrow 7800 Series is an excellent solution for applications where a door is normally operated manually but also requires convenient automatic activation when needed.
Unlike automatic operators that rely primarily on the motor during the closing cycle, the Arrow 7800 uses its integrated hydraulic door closer to control the closing cycle. This provides smooth manual operation, quiet closing and reliable mechanical spring closing even when electrical power is unavailable.
One of the defining features of the Arrow 7800 Series is its combination of powered automatic opening with a traditional hydraulic mechanical door closer.
When the door is opened manually, the operator's motor and drive system are not required to provide normal mechanical closing force. Instead, the hydraulic closer controls the door through the closing cycle.
The result is a commercial opening that provides the familiar operation of a quality manual door closer while still offering powered automatic opening whenever an activation device is used.
The closer provides adjustable spring power, backcheck, sweep and latch control, allowing the opening to be properly adjusted for the specific door and application.
Traffic Rating: Moderate / Medium Traffic
Maximum Door Weight: Up to 250 lbs.
Door Width Range: Approximately 28"–48", subject to application and code requirements.
Mounting: Push or Pull Side
Handing: Non-Handed
Application: Interior and Exterior Commercial Doors
Warranty: 2-Year Limited Warranty
The Arrow 7800 Series can be integrated with multiple types of automatic door activation equipment, allowing the opening to be configured around the needs of the facility and its users.
Pair the Arrow 7800 with compatible wave-to-open switches or other activation devices to create a convenient hands-free automatic door opening.
Touchless activation is particularly useful in medical facilities, restrooms and other commercial environments where reducing physical contact with frequently touched door hardware is desirable.
The automatic hold-open time can be adjusted from approximately 0–30 seconds. A minimum hold-open time may be required depending on applicable ADA and ANSI/BHMA A156.19 requirements.
If the door encounters an obstruction during powered opening, the motor stops. The mechanical closer can then provide controlled spring closing.
Allows the operator to bypass the remaining hold-open period when extended hold-open is unnecessary, with adjustable door sensitivity.
An adjustable 0–5 second delay provides compatible electric locking hardware time to release before the automatic operator begins opening the door.
If the operator continuously receives an activation signal for an extended period, the control system can time out to help protect the motor and operator electronics.
The Arrow 7800 includes an onboard power supply and relay interface to help coordinate compatible electric locking hardware and automatic door accessories.
This allows the operator to be incorporated into openings using equipment such as compatible electric strikes, access-control systems and activation devices. The adjustable motor-start delay allows locking hardware time to release before powered opening begins.
An electric strike can be interfaced with the Arrow 7800 automatic door operator. When the opening is activated, the properly configured control system can release the electric strike before the automatic opening cycle begins.
Electric locking solutions can be configured for openings using compatible cylindrical lever locks, rim exit devices, panic hardware and access-control systems.
Power Input: 120 VAC, 60Hz or 220 VAC, 60Hz depending on configuration
Current Draw: 0.6A or 0.3A depending on input voltage
Accessory Power: 24VDC, 1.1A onboard power supply
The combination of automatic operation and mechanical hydraulic door control makes the Arrow 7800 well suited for commercial openings where the door may frequently be used manually but automatic accessibility is also required.
The Arrow 7800 can be used in appropriate fire-rated door applications when the operator, door, frame, hardware and complete opening are properly specified, configured and installed for the required rating.
The Arrow 7800 Series offers a practical combination of automatic accessibility and traditional hydraulic door control. The door can provide powered automatic opening when activated while retaining the familiar manual feel and controlled mechanical closing of a commercial door closer.
For facilities that need ADA accessibility, quiet operation, touchless activation capability, electric lock integration and dependable mechanical closing, the Arrow 7800 provides a versatile low energy automatic swing door solution.

Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.

If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.

