CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
*Commercial Door Not Included. Automatic Door Opener Only.
Need a powerful automatic door operator for a heavy or high-traffic commercial swing door? The Maverick HA8SP Ultra Heavy Duty Automatic Door Opener is engineered for demanding commercial applications where durability, power and long-term reliability matter.
This specific model is configured for a Right Hand Reverse (RHR) push-side application and features a clear anodized aluminum finish.
Designed for doors weighing up to 550 lbs., the Maverick HA8SP combines a powerful 1/8 HP electromechanical motor, high-precision commercial gearing, a cast aluminum closed gearbox and adjustable spring tension to provide dependable automatic operation in high-traffic commercial environments.
IMPORTANT – OPERATOR ONLY: This product consists of the Maverick HA8SP automatic door operator only in the specified Right Hand Reverse push configuration. Handicap push buttons, wireless transmitters, receiver, door, frame, locks, panic hardware, electric strikes and other accessories are not included.
| Model | Maverick HA8SP |
| Product Type | Automatic Door Operator Only |
| Door Handing | Right Hand Reverse (RHR) |
| Mounting / Arm Configuration | Push Side |
| Door Operation | Operator Pushes Door Open |
| Finish | Clear Anodized Aluminum |
| Traffic Rating | High Traffic / Heavy Commercial Use |
| Maximum Door Weight | Up to 550 lbs. |
This SKU is designed for customers who need the Maverick HA8SP automatic door operator without an activation package.
This is NOT the Maverick HA8SP wireless handicap push button package.
Handicap push buttons, transmitters, receivers and other activation devices can be selected separately when required for the application.
Application photos may show the Maverick HA8SP installed on different commercial door types to demonstrate how the operator can be used. Doors and accessories shown in application images are not included with this product.
This particular HA8SP is configured for a Right Hand Reverse (RHR) door using a push-side operator installation.
In this configuration, the Maverick HA8SP is mounted so that the operator arm pushes the door open during automatic operation.
Door handing and operator mounting configuration are important when selecting an automatic swing door operator. Verify that your opening requires a Right Hand Reverse push configuration before ordering this model.
This model features a clear anodized aluminum operator housing, providing the familiar silver aluminum appearance commonly used on commercial storefront, hollow metal and institutional door openings.
The clear anodized finish provides a clean commercial appearance and coordinates well with many common aluminum frames and commercial door hardware finishes.
The Maverick HA8SP is not limited to one specific type of commercial door. When properly selected and installed for the opening, the HA8SP can provide automatic operation for a variety of commercial swing door applications.
Application images showing these door types are provided to demonstrate the versatility of the Maverick HA8SP operator. The doors, frames and associated door hardware shown are not included.
Not every automatic door opening has the same demands. A lightly used interior door and a busy commercial entrance can place dramatically different loads on an automatic door operator.
The Maverick HA8SP is designed for the demanding end of the spectrum.
Its heavy-duty electromechanical drive system, high-precision commercial gearing, cast aluminum closed gearbox and 1/8 HP motor make it an excellent choice for high-use commercial entrances and doors weighing up to 550 lbs.
The Maverick HA8SP is built around a commercial-grade electromechanical drive system engineered for sustained long-term operation.
Exterior commercial doors can be challenging for an automatic operator because of wind loads, pressure differences and building stack effect.
The Maverick HA8SP incorporates adjustable spring tension, allowing the operator to be tuned for demanding opening conditions.
This makes the HA8SP particularly well suited for applications where a lighter-duty automatic door operator may struggle with the conditions at the opening.
Heavy-duty automatic operation does not mean the door should become difficult to use manually.
The Maverick HA8SP incorporates a one-way mechanical clutch designed to allow easier manual door operation when the automatic operator is not being activated.
Manual opening and closing force can be adjusted from approximately 5 to 30 lbs., depending on the application and setup.
The HA8SP combines heavy-duty mechanical construction with a digital control system designed for commercial automatic door applications.
Because this SKU is the HA8SP operator only, you are not paying for handicap buttons or wireless activation equipment that you may not need.
This makes the operator-only model ideal for replacement installations, access control projects and applications where activation equipment is already installed or will be selected separately.
Depending on the application, the HA8SP can be integrated with compatible:
Activation devices and accessories are sold separately.
Need your door to automatically unlock before the HA8SP begins opening? The operator includes an integrated electric lock interface for use with compatible electric locking hardware.
Depending on the existing door hardware and overall system design, the HA8SP can be coordinated with compatible electric strikes, magnetic locks and building access control systems.
When properly configured, the locking device can release before the operator begins the automatic opening cycle.
Electric locking and access control hardware are not included with this operator-only model.
| Model | Maverick HA8SP |
| Configuration | Right Hand Reverse – Push Side |
| Finish | Clear Anodized Aluminum |
| Operator Type | Standard Profile Low Energy Automatic Swing Door Operator |
| Maximum Door Weight | Up to 550 lbs. |
| Recommended Application | High Traffic / Heavy Commercial Use |
| Header Profile | 6-1/2" x 4-1/2" |
| Motor | 1/8 HP Electromechanical Motor |
| Operating Voltage | 115 VAC |
| Drive Train | Cast Aluminum Closed Gearbox |
| Control System | Digital Control Board |
| Limit System | Magnetic Limit Switches |
| Arm Connection | 1" Solid Spline Spindle |
| Mechanical Clutch | Standard |
| Adjustable Spring Tension | Yes |
| Adjustable Door Stop | Yes |
| Electric Strike Power | 24 VDC |
| Circuit Protection | 3 Amp Fuse |
| Manual Opening / Closing Force | Adjustable approximately 5 to 30 lbs. |
| Push Reveal | 0" to 14" |
| 39" Header Weight | Approximately 45 lbs. |
The Maverick HA8SP is designed for commercial low energy automatic swing door applications and complies with applicable standards including:
Automatic door systems should be installed, adjusted and maintained in accordance with applicable building codes, accessibility requirements, door hardware requirements and the requirements of the complete door assembly.
Not every customer needs a complete automatic door kit.
You may already have handicap push buttons. You may already have an access control system. You may be replacing an existing automatic operator. Or you may simply want to choose your activation and locking hardware separately.
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
