Kawneer Handles & Replacement Storefront Door Handle Parts

Shop Kawneer door handles and replacement handle hardware for commercial aluminum storefront doors. Automatic Door and Hardware carries replacement Kawneer pull handles, push bars, back-to-back pull handle sets, combination push/pull handle sets, and mounting hardware for repairing worn, damaged, or missing storefront door hardware.

Whether you are maintaining a retail entrance, office building, restaurant, school, medical facility, or other commercial property, our selection of Kawneer storefront door handles makes it easier to restore the appearance and operation of your commercial glass entrance.

Kawneer Storefront Door Handle Options

Commercial storefront doors use several different handle configurations depending on how the entrance was originally equipped. This category includes replacement components for common Kawneer configurations, including:

• Offset Pull Handles for commercial aluminum and glass storefront doors
• Back-to-Back Pull Handle Sets with a pull handle on each side of the door
• Pull Handle & Push Bar Sets for traditional push/pull storefront door operation
• Single-Bend Push Bars for commercial storefront entrances
• Thru-Bolt Mounting Hardware for securing handles and push bars
• Back-to-Back Mounting Hardware for compatible handle assemblies

Replacement Kawneer Commercial Glass Door Handles

A damaged or loose handle does not necessarily mean the entire storefront door needs to be replaced. In many applications, the existing door can be restored by replacing the pull handle, push bar, mounting hardware, or complete handle assembly.

When selecting replacement hardware, it is important to match the existing door configuration and mounting requirements. Handle style, door width, finish, mounting-hole spacing, and the hardware used on the opposite side of the door can all affect which replacement assembly is appropriate.

Kawneer Handles for 36" Storefront Doors

We offer Kawneer handle configurations for common 36-inch commercial storefront doors, including combination offset pull handles with push bars as well as back-to-back pull handle configurations.

Always verify your existing door dimensions and mounting configuration before ordering. A storefront entrance may look similar from the outside while using different handle mounting arrangements.

Clear Anodized & Dark Bronze Kawneer Handles

Replacement storefront hardware should not only fit correctly—it should complement the existing aluminum entrance. Kawneer handle assemblies in this category are available in common commercial storefront finishes, including clear anodized aluminum and dark bronze anodized.

Matching the finish of the existing door helps provide a cleaner, more professional appearance after the replacement hardware is installed.

Common Reasons to Replace a Storefront Door Handle

How Do I Know Which Kawneer Handle I Need?

Before ordering a replacement Kawneer storefront door handle, inspect your existing hardware and door carefully. Determine whether your entrance uses a pull handle with a push bar, back-to-back pull handles, or another configuration.

Helpful information to verify includes:

• Door width
• Door thickness
• Existing pull handle style
• Push bar or inside handle configuration
• Center-to-center mounting-hole spacing
• Clear anodized or dark bronze finish
• Existing mounting hardware

Need More Than a Kawneer Door Handle?

Automatic Door and Hardware also carries a complete selection of replacement Kawneer storefront door parts, including locks, pivots, hinges, thresholds, door closers, exit devices, weatherstripping, sweeps, and other commercial entrance hardware.

Need Help Finding the Correct Kawneer Handle?

Commercial storefront hardware can be difficult to identify from appearance alone. If you are unsure which Kawneer replacement handle, push bar, pull handle, or mounting hardware your door requires, contact Automatic Door and Hardware for assistance.

Call: 877-412-3667
Email: [email protected]