• 877-412-3667 9AM - 3PM CST

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

Navigate to the undefined homepage

USA Company
​Located in Texas

How to paint a hollow metal door

How to paint a hollow metal door

Painting a hollow metal door may seem like a daunting task, but with the right materials and techniques, it can be a relatively straightforward process. A fresh coat of paint can give an old or worn door a new lease of life and add a touch of style to any room. In this article, we will go through the step-by-step process of how to paint a hollow metal door.

Materials needed:

-Sandpaper (medium-grit)-Cleaning solution-Painter's tape-Primer-Paint-Paintbrush-Paint roller-Paint tray

Step 1: Remove hardware and tape off surrounding areas

Before starting the painting process, it is essential to remove any hardware from the door, such as hinges, doorknobs, and locks. This will make the painting process more manageable and ensure a smooth and even finish. Additionally, use painter's tape to tape off any surrounding areas, such as walls or floors, to protect them from any stray paint.

Step 2: Clean and sand the door

The next step is to clean and sand the door's surface to ensure that the paint adheres properly. First, use a cleaning solution to remove any dirt, grime, or grease from the surface of the door. Afterward, use medium-grit sandpaper to roughen up the surface of the door, which will help the primer and paint stick better.

Step 3: Apply primer

Once the door is clean and sanded, it is time to apply the primer. A good quality primer will create a smooth and even surface for the paint to adhere to, as well as help to prevent any rust or corrosion. Using a paintbrush or roller, apply the primer to the entire surface of the door. Be sure to use smooth, even strokes and apply a thin layer. Allow the primer to dry completely before moving on to the next step.

Step 4: Paint the door

After the primer has dried, it is time to apply the paint. Choose a high-quality paint that is designed specifically for metal surfaces, as this will provide the best finish. Using a paintbrush or roller, apply the paint in thin, even coats. It is better to apply multiple thin coats than one thick coat, as this will help to avoid drips and ensure an even finish. Allow each coat to dry completely before applying the next one.

Step 5: Reattach hardware and remove painter's tape

Once the final coat of paint has dried, it is time to reattach any hardware that was removed from the door. Be sure to wait until the paint is completely dry before reattaching any hardware. Additionally, remove any painter's tape that was used to protect surrounding areas.

Tips and Tricks:

If the door has any dents or scratches, use a filler to fill in any imperfections before painting.If you are painting a metal door that is exposed to the elements, such as a front door, consider using a weather-resistant paint to ensure that the door is protected from the elements.

When applying paint with a roller, use a foam roller, as this will provide a smoother finish than a traditional roller.

In conclusion, painting a hollow metal door is a relatively straightforward process that can be done with the right materials and techniques. By following the steps outlined in this article, you can achieve a smooth and even finish that will make your door look brand new. With a fresh coat of paint, your hollow metal door can add a touch of style and sophistication to any room.

Hollow metal doors are available for sale at the best prices at www.autodoorandhardware.com.

Get The Parts That Fit

Filter your results by entering your commercial door's Make and/or Model to ensure you find the parts that fit your door.

Need A Quotation?

Receive A Free Quotation Immediately

Email [email protected] or call 877-412-3667 with the product you are interested in, the quantity, and any other requirements you may have. One of our specialists will email you back a free quotation shortly. Did you know we offer free design help? If you are unsure of the product you need, but know the scope of what function or application you need, our design team can help! Contact us with your inquiry today.