CALL 877-412-3667 9AM - 2:45PM CENTRAL
ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY
*Commercial Door Not Included
The CONDOR SWING Single Automatic Door Operator is a heavy-dutycommercial automatic swing door system designed forsingle commercial door applications. Built with oversized bearings,solid steel gearing, a powerful commercial drivetrain, and an advanced electroniccontrol system, the CONDOR SWING is engineered for demanding pedestrian trafficand professional automatic door installations.
The CONDOR SWING is a commercial automatic swing door operatorplatform engineered for new automatic door installations, accessibility projects,high-traffic entrances, and applications where a durable automatic swing doorsystem is required.
This single-door configuration is designed to provide dependable powered automaticoperation of a compatible commercial swing door while offering the controlflexibility required for a wide variety of commercial entrance applications.
The CONDOR SWING single operator provides a complete automatic operator platformfor compatible commercial swing doors. The operator provides powered opening whilethe advanced control manages the automatic opening, hold-open, and closing cycle.
The CONDOR SWING is engineered for demanding commercial pedestrian traffic.Its mechanical drive system incorporates oversized bearings and solid steelgearing to provide the strength and durability required for heavy-dutyautomatic swing door applications.
The commercial-grade drivetrain provides dependable opening power while theoperator's heavy-duty aluminum header protects the motor, gearbox, electroniccontrol, and internal wiring.
This combination of robust mechanical construction and advanced electronic controlmakes the CONDOR SWING an excellent automatic operator for demanding commercialand institutional door openings.
The CONDOR SWING can be configured for high-energy or low-energyautomatic door applications, providing flexibility for a wide rangeof commercial entrance requirements.
A single control platform provides flexibility over the operating characteristicsof the door and allows the installer to configure the system for high-energy,low-energy, or low-force applications.
Proper configuration should be selected based on the complete door opening,activation method, safety requirements, and intended application.
The CONDOR SWING uses an advanced electronic control system designed to provideflexibility over the automatic opening and closing cycle.
Operating parameters can be adjusted by the installer to properly configure thedoor for the requirements of the commercial opening.
Commercial buildings can develop pressure differences that make exterior doorsmore difficult to open. HVAC systems, building stack pressure, and environmentalconditions can increase the amount of force required to move a commercial door.
The CONDOR SWING includes power boost capability designed to helpthe automatic operator manage challenging building pressure conditions and providedependable automatic opening performance.
Exterior commercial doors may be exposed to changing wind conditions and suddenwind gusts. The CONDOR SWING incorporatesclosed-loop wind-load detection designed to help the operatorrespond to changing environmental loads.
This makes the CONDOR SWING particularly well suited for demanding commercialentrances where exterior conditions can affect automatic door operation.
The CONDOR SWING features Push-N-Go capability, allowingautomatic operation to begin when the user manually starts moving the door.
This provides another convenient method of initiating automatic door operationin addition to compatible push buttons, sensors, and other activation devices.
A separate hold-open timer allows the installer to configure how long the doorremains open before beginning the closing cycle.
The CONDOR SWING provides selectable obstruction detection functions to help theoperator respond appropriately if the door encounters resistance during operation.
Depending on the selected configuration, obstruction response options include:
This provides additional flexibility when configuring the automatic operator forthe requirements of the commercial entrance.
Commercial automatic doors frequently need to operate with electric lockinghardware. The CONDOR SWING includes abuilt-in 10A lock relay for integration with compatible electriclocks and strikes.
Depending on the complete door system, the operator can be integrated withcompatible:
This allows the automatic operator to be incorporated into a completeautomatic unlocking and automatic opening system when requiredby the application.
The CONDOR SWING is available with arm configurations designed for differentcommercial swing door applications.
Proper arm selection depends on the door handing, swing direction, reveal,frame construction, mounting configuration, and requirements of the opening.
The CONDOR SWING automatic operator is housed inside a heavy-duty aluminum headerthat provides a clean commercial appearance while protecting the mechanical andelectronic components.
Header configurations are available for commercial automatic door openings rangingfrom approximately 32 inches through 110 inches, depending on theselected configuration and application.
The CONDOR SWING can be configured as part of a commercial accessible entrancesystem to make compatible door openings easier to use for wheelchair users,senior citizens, individuals using walkers or mobility aids, and people who mayhave difficulty manually operating a commercial door.
Compatible handicap push buttons, touchless switches, sensors, and otheractivation devices can be connected to the CONDOR SWING to provide automaticdoor activation.
Accessibility of the finished doorway depends on the complete opening,installation, hardware, activation-device placement, clearances, operatingsettings, and requirements applicable to the project.
The CONDOR SWING can be integrated with a wide variety of commercial automaticdoor accessories and activation equipment.
Guide rails, sensors, handicap push buttons, electric locking hardware,and other accessories are sold separately unless specifically stated as includedwith the selected package.
This listing is for asingle-door CONDOR SWING automatic door operator systemintended to provide automatic operation of one compatible commercial swing door.
Activation devices, handicap buttons, safety sensors, guide rails, electriclocks, wireless transmitters, receivers, access control equipment, and otheraccessories are sold separately unless specifically stated as included withthe selected package.
Commercial automatic door installations vary from one opening to another.Before purchasing, verify the requirements of the specific door opening.
Yes, anyone can purchase from Automatic Door and Hardware.
The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.
Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.
If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.
Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.
If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.
Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.
If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.
Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.
Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.
If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!
