Home > Commercial Door Glass Lite Kits > ADH Select L-FRA100-SP Low Profile Variable Door / Glass Thickness Lite Kits > L-FRA100-SP Low Profile Variable Door/Glass Thickness Lite Kit with 1/4" Diamond Wired Fire Protective Wired Glass
We found 10 results matching your criteria.

L-FRA100-SP Low Profile Variable Door/Glass Thickness Lite Kit with 1/4" Diamond Wired Fire Protective Wired Glass

Lite Kit Includes
  • Superlite 1-W Glass Features
  • L-FRA100 Low Profile Fire Rated Lite
  • GT-118 Glazing Tape
L-FRA100-SP Low Profile Variable Door and Glass Thickness Fire Rated Lite Features
  • 18 ga. cold rolled steel
  • Mitered and welded corners
  • Welded reinforcing clips at corners
  • Counter-sunk mounting screw-holes
  • #8 Phillips head SMS
  • Available in uneven and fractional sizes
  • Available in Gray Primer (GPZ), Dark Bronze(DKB), Tan (TAN), Beige Primer (BPR) powder coat and Galvanealed
  • Specify door thickness on order if other than 1-3/4"
  • Some applications require thicker glazing tape
Superlite 1-W Glass Features
  • 1/4" (7mm) Thick
  • 3/4" X 3/4" Diamond pattern electrically welded steel wire mesh
  • Clear glass - ground and polished both sides
  • Maintains integrity when fractured or subjected to a hose stream
  • Etched with UL classification on each piece
  • Weight: 3 lbs./sq. ft.
  • STC 28 rating
  • Fire-rating information: Certified by UL toANSI/UL10C: 20 min. with closed cell PVC foam glazing tape like NGP GT-116, GT-118, or GT132 45, 60 & 90 min. with NGP GT-9800 intumescent glazing tape
  • ANSI/UL10B with Butyl glazing tape like NGP GT-16
  • ANSI/UL9 with closed cell PVC glazing tape like NGP GT-116, GT-118, GT-132
  • Impact Safety Rating Information: Meets ANSI Z97.1 Class C
  • Does NOT comply with IBC 2006 or newer requirements for use in doors or sidelights. Allowed only in non-hazardous locations defined in IBC
Sort By:
Page of 1