• 877-412-3667 9AM - 3PM CST

  • ORDERS OVER $200 SHIP FREE - CONTINENTAL US ONLY

Navigate to the Automatic Door and Hardware homepage

USA Company
​Located in Texas

36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 1 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 2 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 3 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 4 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 5 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 6 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 7 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 8 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 9 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 10 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 11 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 12 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 13 of 0
36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish - Image 14 of 0

36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish

Auto Door and Hardware
List Price: $3,783.77
$
Savings: $

Item Return Policy: Assembled Per Order, Non-Returnable
Choose your options:
Door Hand
Add Outside Lever Handle
Frame Type
Outside Lever Handle Function
Bottom Door Seal (Recommended Per Fire Code)
Frame Anchors
Fire Label
Door Closer (Required By ADA & Fire Code)
Door Frame Seal (Recommended Per Fire Code)
Kick Protection Plate (Saves Door From Damage)
Door Stop (Prevents Damage To Door)
ADA Threshold (Recommended Per Fire Code)
Part Number: GLA-SD3070EXTED
Custom Manufactured, Usually Ships in 3 Weeks

FREE SHIPPING ON ORDERS OVER $200

36 Inch x 84 Inch (3070) Metal Exit Commercial Door Kit, Includes Heavy Duty Steel Door, Frame For Exterior Wood Stud, Metal Stud, or Masonry Wall, and Push To Exit Panic Bar Hardware, Rust Inhibiting Gray Primer Finish

Designed For Installation On Exterior Walls

The Gladiator exterior commercial metal door kit is an easy to install door system designed for installation on exterior walls of all construction types. Each door frame includes anchors specific for your door installation application. Below are the common types of door frame mounting anchors to choose from. Each anchor is used for a specific exterior wall type:
  • Wood or Metal Stud Anchors: Used on existing exterior walls constructed from wood studs or metal studs. Designed to be used on a building wall that has already been built. Door frame sets into rough opening and uses anchors to attach to wood or metal stud wall.
  • Masonry Tee Anchors: Used on CMU, Block, Brick, or any other type of masonry wall that has not been built yet. Door frame sets in place, and the masonry wall is erected around the door frame.
  • Masonry Wire Anchors: Used on CMU, Block, Brick, or any other type of masonry wall that has not been built yet. Door frame sets in place, and the masonry wall is erected around the door frame.
  • Butterfly Anchors With Masonry Sleeve Bolts: Used on any existing CMU, Block, Brick, or Masonry wall opening. Door frame sets into rough opening, and attaches using the masonry sleeve bolts.
  • Butterfly Anchors With Masonry Wood Screws: Used on any existing non-masonry wall opening. Door frame sets into rough opening, and attaches using the wood screws provided.
  • Punch and Dimple With Masonry Sleeve Bolts: Used on any existing CMU, Block, Brick, or Masonry wall opening. Door frame sets into rough opening, and attaches using the masonry sleeve bolts.
  • Punch and Dimple With Masonry Wood Screws: Used on any existing non-masonry wall opening. Door frame sets into rough opening, and attaches using the wood screws provided.

Door Frame Jamb Depth

The door frame is manufactured from 16 gauge steel and is designed to butt directly against the wall thickness. We offer a door frame jamb depth for all of the building code compliant wall types:
  • 5-3/4" Jamb Depth (Most Common) - Designed to butt against a wall with an overall thickness greater than 5-3/4"
  • 4-3/4" Jamb Depth - Designed to butt against a wall with an overall thickness greater than 4-3/4"
  • 7-3/4" Jamb Depth - Designed to butt against a wall with an overall thickness greater than 7-3/4"
  • 8-1/4" Jamb Depth - Designed to butt against a wall with an overall thickness greater than 8-1/4"

Unsure Of What Jamb Depth You Need?

Exterior door frames are always installed butted against the wall, and held to the outside of the building. Most exterior walls are wider than 5-3/4 inches, therefore the most common exterior door frame jamb depth used is the 5-3/4" jamb depth. In any scenario, since the door frame is butted against the wall, you will want to make sure that the door frame jamb depth is less than that of the overall wall thickness.

Before You Order

Before you place your order be sure to verify the rough opening requirements for this door as well as consider the following additional options available.

Rough Opening Requirements

  • Frame designed to butt against an exterior wall
  • Rough Opening: 40-1/2" Wide x 86-1/4" Tall

Optional Outside Lever Handle For Panic Bar

This Gladiator metal door kit includes the option to add an outside lever handle to the door. The standard metal door kit includes no outside lever, so the door operates strictly as an exit only door. However, if the door application is for a rear entry door, then a lever handle will be necessary. If the outside lever handle option is selected, please note that the function of the lever handle, or how it operates must be chosen.

Outside Lever Handle Functions

This Gladiator metal door kit has the option to include an outside lever handle to access the door. If an outside lever handle is chosen, the function of the lever handle must be selected. The following lever functions can be chosen below depending on your door application. For example, if this metal door is going to be used as a rear entry door to a warehouse, then the "Entrance" function would be selected.
  • Entrance: Key locks and unlocks lever.
  • Storeroom: Key operates lever, otherwise always locked.
  • Passage: Lever always operable and free.

Optional Commercial Door Closer

A commercial door closer is a hydraulic device that regulates the closing speed of the door and will automatically close the door after it has been used. Commercial door closers help lengthen the life of your commercial metal door and also act as a safety device preventing the door from slamming closed on any one. As the manufacturer it is recommended to include the door closer.

Optional Door Threshold

A door threshold is an aluminum bottom plate designed to span across the foot of the doorway. It provides a seal and barrier under the door to prevent water, insects, and other debris from entering under the door way. As the manufacturer it is recommended to include the door threshold.

Optional Door Sweep

A door sweep is a weatherstripping device designed to mount to the bottom of the door. It is available with nylon bristles or a vinyl gasket and is used to seal the gap between the bottom of the door and the threshold. Weatherstripping plays an important role in improving your building's energy efficiency as well as pest control. As the manufacturer it is recommended to include a door sweep.

Optional Door Frame Weather Stripping

Door frame weather stripping is available as either a stick on gasket or a screw mounted bulb gasket. Both types are designed to eliminate the gap between the door and frame, providing your building with better energy efficiency. As the manufacturer it is recommended to include some form of door frame weather stripping.

Optional Commercial Door Stop

If your metal door is going to be installed in a location where the door can hit the wall when it is fully open, then a wall stop or floor stop is recommended. Door stops help prevent damage to your wall and door. Each time a door slams open against the wall, the impact travels through the door, hardware, and into the frame. This can cause the frame and door to bend as well as damage to the hardware.

Optional Door Holder

A kick down door holder or crash chain door holder are also available which allows the user to hold the door open. This option is great for storerooms or closet doors where pedestrians are constantly restocking or moving in and out of the room.

Optional Fire Label

If the commercial door is going to be installed on a fire wall, we offer a variety of fire ratings to choose from up to 3 hours.

This Gladiator Metal Door Kit Includes

  • 1 Each Gladiator Commercial 18 Gauge Heavy Duty Steel Door
  • 1 Each Gladiator Commercial 16 Gauge Heavy Duty Steel Knock Down Frame For Butting Against Exterior Wall
  • 3 Each Commercial Heavy Duty Ball Bearing Hinges
  • 1 Each Commercial Heavy Duty Panic Rated Push Pad Exit Device

Features

Heavy Duty

The Gladiator metal door is commercial industrial grade and manufactured from 18 gauge steel. The door is well insulated with a full body of polystyrene, providing energy efficiency to your building. Top and bottom caps provide additional structural integrity to the Gladiator metal door so that it will not bend or deflect. 12 gauge closer reinforcement as well as 7 gauge hinge reinforcement allows the Gladiator metal door to provide smooth opening and closing for years, without the hassle of the commercial door hardware breaking down.

Galvannealed and Rust Inhibiting Finish

Each Gladiator metal door and frame is Galvannealed, allowing it to help prevent rust. Additionally, each metal door and frame comes with a baked on prime coat finish. This primer is rust inhibiting also helping to prevent rust.

Insulated Core - Not Hollow Core!

Gladiator metal doors come with a premium insulating core known as polystyrene. Lower grade metal doors are not insulated or feature cardboard insulation known as honeycomb. Our polystyrene core will help maintain your building's energy year round. The insulated door will also provide more sound deadening than that of a hollow core metal door.

Anti Jimmy Hinges

Included on each Gladiator commercial metal door are anti-jimmy ball bearing hinges preventing vandals from removing the door hinges. These heavy duty security hinges provide safety and peace of mind for your commercial building.

Security Door Handle

Each Gladiator commercial door comes equipped with a commercial grade lever handle to ensure proper security and durability. This heavy duty door handle is designed for high traffic, abuse, and reliability.

Applications

  • Exit Doors
  • Rear Building Doors
  • Side Exit Doors

Freight

Due to the size of Gladiator commercial door kits, this product ships by common carrier. Each door kit is carefully packaged to ensure no damage. Doors and frames are custom pallet crated to ensure safe transit to your job site or preferred location. A lift gate service is included standard will all commercial door deliveries.
Brand: Automatic Door and Hardware
Model: Gladiator
Part Number: GLA-SD3070EXTED
Catalog: Commercial Steel Doors
Level: Heavy Duty, SDI Level 2, 18 Gauge Steel Face Sheets
Compliance: Meets ANSI A250.8-1998 (SDI-100)
ADA Compliant: No
Hardware Preparations: In Accordance With ANSI A250.6-1997
Hardware Locations: In Accordance With ANSI/DHI A115
Nominal Door Size: 36" x 84"
Exact Door Size: 35-3/4" x 83-1/8"
Rough Opening Size: 40-1/2" x 86-1/4"
Reinforcement: 7 Gauge Hinge Reinforcement, Door Closer Reinforcement
Door Finish: Factory Applied Baked On Rust Inhibiting Gray Primer. Primer can be painted after installation if desired, but not required.
Fire Rating: Optional WHI Up To 3 Hour Fire Rating For Exterior Doors
Buy American Act Compliance: Made In USA
Core: Polystyrene
Handing: Right Hand Reverse, Left Hand Reverse
Hinges: Universal Hinge Preparation For Field Conversion From Standard Weight (.134) Hinges To Heavy Weight (.180) hinges
Edges: Square Hinge and Lock Edges - Full Height, Epoxy Filled Mechanical Interlock Edges
Channels: Top and Bottom Channels
R Value: 7.14
U Value: 0.14
STC Rating: 33
Prep: Exit Device
Hinge and Lock Locations: Gladiator
  • Having any trouble? Give us a call 877-412-3667

  • FAQ

    Frequently Asked Questions

Can I Buy From You?

Yes, anyone can purchase from Automatic Door and Hardware.

When Will I Receive My Order?

The time you receive your order is dependent on two factors: product lead time and the shipping method. A product lead time is the time it takes for our company to manufacture the product, package it, and prepare it for shipping. The product lead time is listed on each product, right above the "add to cart" button. Please note that product lead times can vary depending on supply chains and seasons. Please contact [email protected] before ordering if you need to meet a specific deadline. The shipping method is the transit time of the product. This is the time required for the freight carrier to pick the product up from our warehouse and deliver it to your location.

Does This Ship From China?

Automatic Door and Hardware is an American owned business located in Texas. We do not drop ship products from China.

I Need This Product But Can't Find The Right Configuration?

If you need a product but in a different hand or finish and cannot find that particular model then please contact [email protected]. One of our specialists can provide you the right product link to the appropriate product.

Do you charge sales tax on any items?

Sales tax is dependant upon your state of residence. If sales tax applies to your state, you will see the amount in the checkout before you place your order. If you are a government facility, school, or university and are tax exempt, please contact [email protected] before placing your order to avoid paying sales tax.

Will This Work For My Application?

If you are ever in doubt if a product will work on your door or application, please contact [email protected] before placing your order. We want to get you the right products. Most of the time a simple email with one of our technical experts can clarify if the product will be suitable for you or not.

I Emailed A Question But Got No Response

Automatic Door and Hardware takes pride in our customer service team responding to email inquiries immediately. Most emails are replied to within minutes. However, our team only responds during normal business hours in the work week. If you have not received a response within 24 hours (not including weekends) please check your SPAM folder. Most likely the response is in there.

Have Questions?

Our Experts Are Always Here To Help!

If you have a question, need a quotation, or assistance of any kind reach out to us directly by emailing [email protected]. One of our experts will contact you back immediately.

5 stars image 1

As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.

5 stars image 1

As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.

5 Stars Image 2

Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.

5 Stars Image 3

Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.

5 stars image 1

As a hospital we depend on our front doors to open and close in order for us to do our job. ADH got the parts we needed out to us immediately.

5 Stars Image 2

Contractors earn a good reputation by providing reliable and durable products to clients. That's why we always use ADH when it comes to doors and hardware.

5 Stars Image 3

Gary was very helpful from the first and communicated with me on his on time. He was in touch with me for several days and was very helpful finding the part I needed although I did not have a picture of the part. Gary went way above what was expected in trying to find the part I needed. When we need more parts for our church doors I will definitely call Gary.

Product 4

If you need help figuring out what to do or how to do it … These people will help you make it happen. In my case it was a hardware issue and I wasn’t sure where to start. After my initial contact and a couple of pictures they were able to solve my issue … and it wasn’t even their product … Wow, these people go above and beyond. Thanks Derek !!!


Reviews

Average Rating:
( 0 )